Results 1 to 9 of 9

Thread: 8x10 film scanners

  1. #1

    8x10 film scanners

    I am looking to scan some of my 8x10 negatives, any ideas?

  2. #2

    8x10 film scanners

    What size? If you are only looking for 2x enlargement you can use a good flat bed if the film is pretty good to start with, otherwise, you may hvae to move to a drum scanner. A wet mount drum scan of 8x10 film is as good as it gets!

  3. #3

    Join Date
    May 2006
    Location
    Arizona
    Posts
    377

    8x10 film scanners

    You're almost in the same boat as I am, I'm looking for a scanner for 5x7 - since 5x7 is almost an orphan format I AM in the same boat as you. Epson has one - #1680 that has an 8x10 illuminator and 1600dpi. AFAIK except for that one scanner you're talking many thousands of dollars for a professional flatbed or a drum scanner. I'm still searching - good luck.

  4. #4
    Ted Harris's Avatar
    Join Date
    Aug 2000
    Location
    New Hampshire
    Posts
    3,465

    8x10 film scanners

    Try the UMAX PowerLook III

  5. #5

    Join Date
    May 2006
    Location
    Arizona
    Posts
    377

    8x10 film scanners

    I'd read the reviews on the Powerlook and eliminated it from consideration. It's almost 2 years old now and only a 1200dpi unit. Mentioned in some reviews was an inability to obtain precise focus on film. The Epson has adjustable focus and will allow scanning with the film against the glass using mounting fluid.

    http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl?msg_id=0067Nv

  6. #6

    8x10 film scanners

    Wayne, this is the first I've heard about mounting fluid. Can you ellaborate? I suppose this must be for eliminating the newton rings. Thanks, jj

  7. #7

    Join Date
    May 2006
    Location
    Arizona
    Posts
    377

    8x10 film scanners

    Joe - it is for eliminating Newton's Rings. Drum scanners use a mounting fluid, and with a flatbed the same technique can be employed. Other techniques to reduce the appearance of the rings is to use a fine powder on the surface of the negatice or replace the scanner's glass with a piece of coated glass. Since you are scanning the emulsion side of the film the liklihood of Newton's rings will vary according to the film being scanned - from what I understand TMAX and Technical Pan are probably the worst offenders.

  8. #8

    Join Date
    May 2006
    Location
    Arizona
    Posts
    377

    8x10 film scanners

    Interesting thread.

    http://groups.yahoo.com/group/piezography3000/message/9643

  9. #9

    Join Date
    Jan 1999
    Posts
    153

    8x10 film scanners

    I'm a bit out of my depth but have started looking and I have seen that Microtek offers 7X10 (yes, 7) transparency scanning and are highly respected in some reviews. It's pricier than many but seems to justify the expense.

Similar Threads

  1. Any "full frame" 8x10 film flatbed scanners exist?
    By JM Woo in forum Digital Hardware
    Replies: 25
    Last Post: 14-Jan-2017, 11:01
  2. Zone System/Drum Scanners - B&W film calibration?
    By Jack Brady in forum Style & Technique
    Replies: 9
    Last Post: 29-Oct-2005, 08:32
  3. Matching Film Curves to Scanners and devices
    By Jeffrey Sipress in forum Style & Technique
    Replies: 18
    Last Post: 29-Jun-2005, 20:45
  4. diy film holders for scanners
    By Mark_3632 in forum Cameras & Camera Accessories
    Replies: 9
    Last Post: 12-Dec-2004, 09:46
  5. 4 x 5 Dedicated Film Scanners ? !!!
    By Sam Gutierrez in forum Digital Hardware
    Replies: 3
    Last Post: 17-Apr-2002, 05:13

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •