Results 1 to 4 of 4

Thread: Bag Bellows DIY

  1. #1

    Bag Bellows DIY

    Planning to build a bag bellows for my monorail 4x5 camera. How important is the inside surface? Does a slight sheen to the fabric cause concern? I got thinking about all the space inside the view camera bellows and compared that to the len ghts medium format camera makers go to by adding baffles in the body. Is there a ny concern with a view camera about similar internal reflections? Do bag bellows inherently produce more flare than a pleated bellows?

  2. #2

    Bag Bellows DIY

    Dave: I don't pretend for one minute to be a camera engineer, but I feel that any reflective surface in the path of the optical image can be degrading. With a bag bellows, the majority of the bag will be on the outer edge of the light path, but where it meets the camera body it can be quite close to the light cone. The effect may be slight, but can cause density problems at the edges of the film. Ansel Adams wrote about internal bellows reflections with his Ansco view camera due to the small size of the bellows. I have experienced the same problems with my own Ansco view camera. A good lens shade is a must. With a bag bellows and a lens with a large circle of coverage, I think you might have problems with the reflections from a shiny surface.

    Regards,

  3. #3

    Bag Bellows DIY

    Dave,

    See the recent thread on bellows materials. You probably want to use a similar two-layer construction as with regular bellows, but, of course, without the stiffeners. You want a dark, matte, lightproof material on the inside like the shutter curtain material discussed.

  4. #4

    Join Date
    Sep 2000
    Location
    Farmington, MI
    Posts
    194

    Bag Bellows DIY

    Dave, I made a bag bellows for the Bender 4x5 I started with, it was an option with the kit. As I recall, the material had a slight sheen to it, but it never caused a problem. One reason may be that bag bellows are used with wide angle lenses with short focal lengths. When these lenses are focused for average distances the rear elements are quite close to the ground glass and the image circle is not that much larger than the camera back, so I think there is less light bouncing around in the first place. You might try to contact Bender to see if he would sell you some of his material. It was a fairly easy project to construct.

Similar Threads

  1. New Bellows
    By Robert McClure in forum Cameras & Camera Accessories
    Replies: 18
    Last Post: 2-Sep-2005, 11:17
  2. Regular bellows as viewing bellows
    By Mike Mahoney in forum Gear
    Replies: 4
    Last Post: 12-Apr-2001, 16:02
  3. Bag Bellows
    By Dave Schneidr in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 5-Apr-2001, 01:02
  4. New bellows for D-2
    By Tony Brent in forum Darkroom: Equipment
    Replies: 6
    Last Post: 24-May-1999, 15:38
  5. Looking after bellows
    By Richard Urmonas in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 11-Apr-1998, 20:12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •