Results 1 to 5 of 5

Thread: Ilex Acme Synchro #3 shutter disassembly

  1. #1
    Memento Mori
    Join Date
    Nov 2023
    Location
    California USA for now
    Posts
    38

    Ilex Acme Synchro #3 shutter disassembly

    Hello again helpful LFs,
    I'm sure only one or two recall my posts of a few months ago. I had to go through RT chemo, but I'm alive and back, albeit worse for wear and tear.

    I'm going through my gear again and want to use my Schneider K 300mm tele, in it's Acme Synchro #3. Poor shutter needs some love.
    I already did the swish and pray but the flash sync no work and the slow speeds are way off.
    I want to open it up.

    Here's the problem: apparently for non standard lenses, there are adapter rings that go between the lens barrel and the shutter. Mine has a bigger OD than the hole(s) in the black speed/fstop indicator plate. It bevels to the appropriate OD to allow it to fit.
    I need to remove it. Tried unscrewing with increasing force. Ended up using lots of force and heat and penetrating oil. Nope.

    Who knows how these adapters attach to the shutter?
    I hope the attached pics help. Click image for larger version. 

Name:	Screenshot_20240424-142413_Gallery KK.jpg 
Views:	13 
Size:	40.1 KB 
ID:	249340Click image for larger version. 

Name:	Screenshot_20240424-142321_Gallery KK.jpg 
Views:	12 
Size:	39.7 KB 
ID:	249341Click image for larger version. 

Name:	Screenshot_20240424-142234_Gallery KK.jpg 
Views:	12 
Size:	33.9 KB 
ID:	249342Click image for larger version. 

Name:	Screenshot_20240424-142043_Gallery KK.jpg 
Views:	12 
Size:	38.0 KB 
ID:	249343

    Sent from my SM-N960U using Tapatalk
    Veni Vedi Vici

  2. #2

    Join Date
    Dec 2018
    Posts
    995

    Re: Ilex Acme Synchro #3 shutter disassembly

    Normally, adapters are just screwed in, but your adapter may have been glued in, galled, or cross-threaded.
    You might try a strap wrench, but be careful because the 'pivot' can bend the adapter.
    A more 'medieval' approach would be to put a rubber band around the adapter, tighten a screw-type hose clamp over the rubber band, and gently tap the hose clamp adjuster counter-clockwise with a small hammer to loosen.
    Or...(best answer)....send it to SK Grimes.

  3. #3
    Memento Mori
    Join Date
    Nov 2023
    Location
    California USA for now
    Posts
    38

    Re: Ilex Acme Synchro #3 shutter disassembly

    I went as far as wrapping rubber sheet and using large slip joint pliers. Didn't budge.

    Didn't know Grimes was still working! I'll look into it.
    Thanks!

    Sent from my SM-N960U using Tapatalk
    Veni Vedi Vici

  4. #4

    Join Date
    Dec 2005
    Location
    El Pueblo de Nuestra Señora la Reina de los Ángeles de Porciúncula
    Posts
    5,816

    Re: Ilex Acme Synchro #3 shutter disassembly

    Congratulations on surviving. Both cancer and chemo are life altering.

    Can't help you with your shutter problem except to say that last time I had a similar problem I took it to a local shop and they didn't seem to have a problem. Are you in SoCal? Steve's Camera Repair is still open, although with shorter days/hours than they once had. They've always done good work on my camera gear.

  5. #5
    Memento Mori
    Join Date
    Nov 2023
    Location
    California USA for now
    Posts
    38

    Re: Ilex Acme Synchro #3 shutter disassembly

    NorCal

    Thanks
    It's horrifying... The"treatment", not the cancer. Tried allll the alt methods for 4 years but it kept coming back. Finally opted for the nightmare of RT chemo. Brutal. Still at the beginning of recuperating. Sigh

    The lens, I'll give it one more unscrewing try... I mean it's gotta be threaded, right?

    Sent from my SM-N960U using Tapatalk
    Veni Vedi Vici

Similar Threads

  1. Ilex #3 Acme Synchro shutter disassembly for CLA??
    By Memento Mori in forum LF DIY (Do It Yourself)
    Replies: 6
    Last Post: 1-Dec-2023, 10:01

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •