Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: How to expose 8x10 Kodak PORTRA 160NC ?

  1. #1

    Join Date
    May 2011
    Location
    Portugal
    Posts
    1

    How to expose 8x10 Kodak PORTRA 160NC ?

    Someone with longtime experience with 8x10 Kodak PORTRA 160NC, HELP!!!
    I recently bought 3 boxes of 8x10 PORTRA 160NC. In Europe this film is extremely expensive!!!
    PLEASE, guidance of how to expose these sheets is needed!

    This is a wide question, of course! Many factors involved.
    A method, a consistent approach!

    Let's consider this: 300mm lens, outdoor scenes, only natural light.
    Subject 20 feet away from the lens / landscape focus.

    How should I use the light meter (160ASA, 100ASA, 80ASA?)
    Reflected light measurement or Incident light measurement?
    Read the darkest area first, where I wish to have detail? How?
    Taking into account the lighting conditions (bright sun-distinct shadows / soft evening sun-soft shadows) should I change my approach??


    Thanks
    Henrique

  2. #2
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    6,737

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    I presume you have used a camera before, so, I'll respond about the specifics of the film. What I do in my darkroom in this case is to chop a sheet up in to 35mm strips. These can be exposed (in my case with a sensitometer) and processed easily (in 35mm reels) for your initial tests.

  3. #3

    Join Date
    May 2006
    Location
    Westminster, MD
    Posts
    1,653

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    Use an incident light meter, and expose a test sheet at ISO 160 to see if you like the results.

    I tend to find I like my color negative film rated 1/3 of a stop more open, but that's just me.
    When I grow up, I want to be a photographer.

    http://www.walterpcalahan.com/Photography/index.html

  4. #4

    Join Date
    May 2006
    Location
    grand rapids
    Posts
    3,851

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    -

  5. #5
    Death Before Digital matthew klos's Avatar
    Join Date
    Nov 2009
    Location
    Massachusetts
    Posts
    85

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    Just shoot a sheet to test.

  6. #6

    Join Date
    Nov 2010
    Posts
    775

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    I usually shot the Portra NC films at about a stop over. For most lighting conditions I'd meter with an ambient meter with the dome pointed at the camera lens or even slightly downward.

    The 160 was good if you shot it at the nominal speed (160) but I usually shot it at 80, which opened up the shadows a bit and gave a nice look. Much of this project was shot that way:

    http://noahaddis.com/ac/ac.html

    I'm speaking in the past tense since I've switched to the new Portra Pro film, which is amazing. The 400 is great and I can't wait to try the 160.

  7. #7

    Join Date
    Nov 2010
    Posts
    775

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    I forgot to add this: It's color negative film and therefore it has quite a bit of exposure latitude. I understand your caution because film and processing are seriously expensive. But you'd have to work pretty hard to screw it up. It's best if you err on the side of overexposure, but even if you go under a bit you can probably still get decent results.

  8. #8

    Join Date
    Apr 2009
    Location
    England, UK
    Posts
    40

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    Would it be worth buying a roll of the same film stock in 35mm or 120 and testing with that?
    Or even test in 5x4 which will be cheaper than 10x8.

  9. #9
    http://www.spiritsofsilver.com tgtaylor's Avatar
    Join Date
    May 2006
    Posts
    4,729

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    I just started shooting Porta 160NC (4x5) and a sure fire way to determine exposure accurately without first testing is to meter off a grey card positioned in the same light that is falling on the subject and check if that reading encompasses the shadows and highlights of the image. I use a Pentax digital spot meter and set the exposure index at ISO 160. Color negative better gives you a lot of latitude to work with but it's to overexpose than underexpose.

    Thomas

  10. #10

    Join Date
    Dec 2006
    Location
    Chicago, IL
    Posts
    1,424

    Re: How to expose 8x10 Kodak PORTRA 160NC ?

    Shoot it at 80 at least. Any color negative film at box speed will lack shadow detail.

    DON'T forget about bellows compensation. When in doubt, add a stop of exposure... or two.

    When shooting portraits, I set my 5D to ISO 50, get a good exposure, and then use the same aperture and shutter speed on Portra 160. But again, if you have to round up or down, err on the side of overexposure.

Similar Threads

  1. B&H Photo: Kodak Portra 8x10 NC not more available
    By P.J. in forum Darkroom: Film, Processing & Printing
    Replies: 8
    Last Post: 14-Jul-2006, 03:26
  2. Portra NC 8x10 processing problems
    By Stephen Vaughan in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 11-Nov-2005, 18:38

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •