Since the cost of getting one's feet wet in LF is often an issue, I thought I would throw this out as one approach: http://members.aol.com/onelucent/LF/shoe.html.
I'm sure others will have similar suggestions or more finely honed examples.
Than
Since the cost of getting one's feet wet in LF is often an issue, I thought I would throw this out as one approach: http://members.aol.com/onelucent/LF/shoe.html.
I'm sure others will have similar suggestions or more finely honed examples.
Than
Ah, the old duct tape camera!
That's a really cool looking camera ;-)
I dunno, but I think its is quite possible to get a good deal every now and then on a starter 4x5. E.g., I just picked up a mintish B&J Watson Press camera (a highly underrated press camera) with 6 film holders, a 135mm lens, filters, teleconverter, storage case for the princely sum of $131. The 6 holders alone should be worth $40 - $50, so the camera and lens (a 135mm Optar) is way under $100.
I have also seen pretty bare 'parts' Crown Graphics (usually no GG and lensboard nor lens) going for about $60 which, if you're willing to do some work on them, would make a beautiful first 4x5 camera. Jon Grepstad has an example of a beautifully done up junker (bought for $29 on Ebay):
http://home.sol.no/~gjon/crown99.htm
Jon's probably a first class carpenter/woodworker himself of course.
James Vail has another of the same breed here:
http://www.srv.net/~vail/woody.htm
which he spent $75 in total.
Bookmarks