Results 1 to 7 of 7

Thread: What did I do wrong ?

  1. #1

    Join Date
    Jan 2010
    Posts
    298

    What did I do wrong ?

    I developed my first 8x10 neg today, and I'm rather pleased that something was on the neg, but I probably did something wrong; please have a look at the colourscan of the neg: what are those green spots ?

    I developed in a Jobo 3063 drum on a CPP-2. The film is Fomapan 100, 9 min at 20°C in Rodinal 1+50. I used 300ml of fluid.

    The only thing I can think of is that I put some vaseline on the inside of the lid, in order to be able to remove it easily (I've read that tip somewhere, and it worked). I wiped of my hands on a clean towel, but I did touch the neg when it was in the drum, to check if it was blocked as it should (it was). Is it possible that there was still enough vaseline on my fingers to have this effect ? Next time, I'll put on medical gloves before touching the film.

    Any other ideas ? Any other comments on this neg ?


  2. #2
    Octogenarian
    Join Date
    Sep 2003
    Location
    Frisco, Texas
    Posts
    3,532

    Re: What did I do wrong ?

    The green color could be where the base side of the film was touching the surface of the drum and the anti-halation dye did not get removed.

    Try refixing the film in a tray and washing it again.

  3. #3
    Moderator
    Join Date
    Jan 2001
    Posts
    8,651

    Re: What did I do wrong ?

    I'd guess it's residual antihalation dye because the processing solutions weren't able to reach all of the base side of the film, against the wall of the drum. Try agitating the negative for several minutes in a tray of Kodak hypo clearing agent, Perma Wash or equivalent, then re-washing.

    I've had this problem when using a 3063 to develop ULF sheets of Fortepan, though not with HP5 Plus.

    If this is indeed the problem, using a larger volume of solution in the drum may help, or you may need to include dunking the negative in a tray of clearing agent as a standard part of your processing cycle.

  4. #4
    MIke Sherck's Avatar
    Join Date
    Mar 2002
    Location
    Elkhart, IN
    Posts
    1,312

    Re: What did I do wrong ?

    Foma's anti-halation dye is a lovely emerald green, so I agree with the previous posters. Just wash it again in distilled water with some Photo-Flo or the like and the dye should come right off.

    Mike
    Politically, aerodynamically, and fashionably incorrect.

  5. #5

    Join Date
    Jan 2010
    Posts
    298

    Re: What did I do wrong ?

    Ok, solved: just soaking some time in distilled water and drying again: perfect !

    Thanks everyone.

    Stefan.

  6. #6

    Join Date
    May 2009
    Posts
    37

    Re: What did I do wrong ?

    Finger prints?

  7. #7

    Join Date
    Jul 2008
    Posts
    791

    Re: What did I do wrong ?

    Sure look like 'digital' artifacts.

Similar Threads

  1. Something wrong developing
    By Studebaker in forum Darkroom: Film, Processing & Printing
    Replies: 21
    Last Post: 21-Jul-2010, 08:44
  2. Pan F 50 & ilfosol s "what's wrong with that !!
    By GOLDFISH in forum Darkroom: Film, Processing & Printing
    Replies: 8
    Last Post: 17-Nov-2009, 06:55
  3. What am I doing wrong?
    By csant in forum Style & Technique
    Replies: 16
    Last Post: 4-Nov-2009, 15:52
  4. Bought a used Schneider 150 Symmar-S; aperture seems wrong
    By bsimison in forum Lenses & Lens Accessories
    Replies: 8
    Last Post: 12-Dec-2006, 08:45
  5. What is wrong with D-76?
    By Paul Kierstead in forum Darkroom: Film, Processing & Printing
    Replies: 13
    Last Post: 8-Mar-2004, 21:18

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •