Results 1 to 5 of 5

Thread: Anyone building their own 4x10's?

  1. #1

    Anyone building their own 4x10's?

    Just wondering if anyone has built their own 4x10 cameras and would be interested in sharing their technique and approach? I have an old 8x10 in parts- the bellows is in very good shape and thought I might be able to use with an 4x1 0 rebuild in some way. Any comments, suggestions, direction would be welcome.

  2. #2

    Anyone building their own 4x10's?

    Wayne, Convertng an 8x10 to 4x10 is no problem, if you have some basic woodworking skil ls. Especially if your bellows are in good shape. A while back, I converted an old Kodak 8x10 flatbed camera to both 4"x10" and 6x 17cm formats by building a set of new ground glass backs. I am currently convert ing a pair of Calumet "405" 4x5 view cameras to 4"x10" and 7"x17" panoramics, w ith full movements. The trickiest part of the project is the film holders. You can buy new 4x10 holders from KB Canham, but I understand that they are really expensive. I have found that I can convert certain wooden graflex 8x10 holders to 4x10 by spliting them down the middle then trimming and glueing. Same thing goes for converting 5x7 holders (easier to find, less $$) to 6x17cm which uses c ut lengths of 120 roll film, or split 5x7 sheet film. I'd be happy to give you a hand in you project. I find both 4x10 and 6x17 quite exciting formats to work with.

    Regards

  3. #3

    Join Date
    Feb 1998
    Posts
    287

    Anyone building their own 4x10's?

    Why not just shoot 8 x 10 and print (or crop) the portion you wish?

  4. #4

    Anyone building their own 4x10's?

    The reason for not using an 8x10 and cropping is that a 4x10 camera is so much smaller and more portable. Try to find a copy of Jay Dusard's book, "Open Countr y". He describes how he built a simple box camera which he calls a "brick."

    The stumbling block is the holder. Dusard was given some x-ray holders. Holders are available for a price. But if you are like me the challenge of a project lik e this is doing it on the cheap.

    I have considered cutting up and rebuilding 8x10 holders. This doesn't look eas y because the old holders are built so well. I will probably give in and buy a Lotus holder (about $100) and build a camera around it.

    If you can come up with a helical lens mount you could build a box camera with e asy focusing. I will probably mount an old graflex bellows on the front of the box so that I can use different lenses.

    I intend to use mainly a 90mm SA which will cover about 8-1/2 inches by 4 with s quare corners. If you don't mind the ends rounded you will get a little more. L ook at the page in the current Calumet fine art catalog shot by Jay Dusard, he l eft the ends round. Using a lens that you already have is cheaper than any 8x10 wide angle that you don't own.

    I hope this gives you some ideas.

    Wayne

  5. #5

    Anyone building their own 4x10's?

    how incented the camera?
    the first person invented the camera?

Similar Threads

  1. Finished building 4x5
    By Calamity Jane in forum Cameras & Camera Accessories
    Replies: 10
    Last Post: 23-May-2004, 11:21
  2. First foray into building photography
    By Mark_3632 in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 14-Apr-2004, 22:42
  3. Building a 12 in x 12 in camera
    By Lawrence Floyd, Jr. in forum Cameras & Camera Accessories
    Replies: 13
    Last Post: 18-May-2002, 11:55
  4. building a lens
    By Harold_2098 in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 5-Aug-2001, 14:30
  5. Building your own 4x5 from scratch
    By al in forum Resources
    Replies: 4
    Last Post: 24-Aug-2000, 21:01

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •