Results 1 to 3 of 3

Thread: Durst Laborator 1000 Question

  1. #1

    Join Date
    Jun 2008
    Location
    Melbourne, Australia
    Posts
    438

    Durst Laborator 1000 Question

    Have just been given a Durst 1000 enlarger which is in working condition, but I have a question about the condenser box setup. In the condenser box, set at 45deg is a couple of mounts which looks like something is supposed to slide into, can anybody tell me what goes in them, the other question is my enlarger has a piece of clear, but anti reflective glass positioned right against the hole the light source screws on to, is this normal? it looks like a modification for some reason. It also had a bit of plastic which appears to be a piece of fresnel sandwiched with it that has partly melted from the heat of the lamp. My guess its to defuse the light some.

    Cheers
    Shane

  2. #2
    Marc! munz6869's Avatar
    Join Date
    May 2006
    Location
    ɐıןɐɹʇsnɐ 'ǝuɹnoqןǝɯ
    Posts
    194

    Re: Durst Laborator 1000 Question

    that's above the condensers themselves, yes? In that triangular void? The mirror for the lamp house is under that 45 degree plate - if the mounts held anything it would obstruct that - I wonder if it was for something else? You can put a Taucoli cold light head in the condenser box, but that sits below that area...

    The manual says (2.4.2) nothing about it...!

    Marc!

  3. #3

    Join Date
    Jun 2008
    Location
    Melbourne, Australia
    Posts
    438

    Re: Durst Laborator 1000 Question

    Well if the old owner doesn't know .....

    I pulled it down after you left and had a good look at it, the glass just looked like a add on.
    May be somebody will post a photo of the inside of theirs.

Similar Threads

  1. Durst L1840 and RH Designs StopClock...can't get there from here?
    By Mark Carstens in forum Darkroom: Equipment
    Replies: 3
    Last Post: 2-Jul-2010, 11:31
  2. Question on Ep 3800 Cartridges--indicators
    By Raymond Bleesz in forum Digital Processing
    Replies: 2
    Last Post: 11-Jun-2010, 03:34
  3. durst laborator spring noise
    By quine in forum Darkroom: Equipment
    Replies: 2
    Last Post: 5-Nov-2009, 20:04
  4. Enlarger Question
    By Dave_B in forum Darkroom: Equipment
    Replies: 16
    Last Post: 22-Apr-2009, 14:53
  5. durst enlarger
    By luis a de santos in forum Darkroom: Equipment
    Replies: 52
    Last Post: 17-Mar-2009, 07:45

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •