Another question regarding my attempt to convert a copy camera into an enlarger (8x10 plus). Several days ago I mentioned that I picked up a Goodwin copy camera with a 13'' x 15'' opening at the top of the bellows. Well today I picked up so me kind of light box at a metal recycler. I thought I might try and use it as a light source. At first glance, it looked like a light box for viewing negs/trans . , but on closer inspection, I'm not sure. Firstly, the odd thing I noticed is the bulb. It looks to be neon, and is white. It's quite a sophisticated looking bulb. The bulb zig zags, much like Ansel Adams used for a cold light source, al though no where near the same concentration of tubes. The total area the tubes c over is 14'' x 18''. I've never heard of neon being used as a light source for a light box. I'm wondering what colour temperature it has. An electrician I showe d the box to, expects the light would be quite powerful judging from the guage o f power cord. That is the second problem, the plug on the power cord. It's not N orth American or anything European. It could be a special plug that plugs into a transformer/power source. It's square with five prongs. Four of the prongs are flat (like the North American plug), with a round prong in the middle. Two elect ricians couldn't identify the plug. I'm not sure if the box has a seperate power source or not, it's quite heavy. Lastly, the box has two pieces of glass, but no white plexi for diffusion. The bottom piece of glass is attached to the box, but the second piece is hinged and they sandwhich together. It would be a perfect place for filters or maybe e ven your neg?
Any comments or help would be appreciative, thanks