Results 1 to 4 of 4

Thread: Two bath print developing

  1. #1

    Join Date
    Jul 2009
    Location
    Staunton Virginia
    Posts
    170

    Two bath print developing

    Looking for threads and info on two bath print developing. I've been using a lot of graded paper lately and would like to have more control in the printing. I shoot 4X5 and develop in W2D2+. My go to developer is Dektol, and I've done a workshop with Chuck Kelton using Metol added to a second bath but having a bit of trouble getting the results I got at the workshop. One bath Dektol 1+1, second bath Dektol 1+1 with a couple of heaps of Metol. Any thoughts or other ideas?

  2. #2
    Moderator
    Join Date
    Jan 2001
    Posts
    6,335

    Re: Two bath print developing

    One common approach has been to use Dektol plus either Selectol Soft or Ansco 120. You can get either of those pre-packaged from the Formulary if you don't want to mix your own from scratch.

  3. #3

    Join Date
    Mar 2002
    Location
    on the banks of the Potomac
    Posts
    2,249

    Re: Two bath print developing

    I used to use the method Oren describes for printing on the old graded Kodak Elite. I learned it from David Vestal. Usually 1 minute in A-120, one minute in Dektol 1:2. That would be if Dektol alone wouldn't give the contrast i wanted on one grade or another. I could fine-tune it further (30" A-120, 90" Dektol, say) if I needed to but it was seldom worthwhile to go that far.
    There's a lot of metol in A-120, use gloves with it (in fact that's good pracitce with all developers.)

  4. #4

    Join Date
    Nov 2007
    Location
    England.
    Posts
    284

    Re: Two bath print developing

    A suitable formula that can be mixed from the basic constituents is Dr. Beer's.
    http://www.digitaltruth.com/data/drbeers.php

Similar Threads

  1. Developing film with Nova Print Processor
    By Timo Ripatti in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 29-May-2010, 17:51
  2. Large print dryer???
    By davispowell in forum Darkroom: Equipment
    Replies: 9
    Last Post: 7-Oct-2007, 12:36
  3. Choice of fixer on print color
    By Michael Graves in forum Darkroom: Film, Processing & Printing
    Replies: 1
    Last Post: 17-Jun-2007, 14:55
  4. Steichen Photo sold for 2.9 mil
    By John Flavell in forum On Photography
    Replies: 22
    Last Post: 13-Mar-2006, 18:59
  5. large digital print solutions
    By giancatarina in forum Digital Hardware
    Replies: 2
    Last Post: 22-Oct-2001, 15:34

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •