Hello,,
This my old C-1 ground camera that I have added a few things to:
The first shows the Korona with an 11x14 expansion back attached and a 210mm Darlot in recessed board.
The next shot shows the Korona with 11x14 back and a 600mm (non-telephoto) lens attached and will work perfect with one rail do to the expansion back and extended lens board.
By using the camera with the expansion back you use less bellows which causes bellows to tend to bunch up and will sag enough to be in frame in vertical position.
This is the reason I developed a bellows bridge that holds bellows up and out of frame, then folds down when not in use.
The filter holder you see here is 5" and I made an adapter using the lens cap of the 600mm lens and a round peice of 3/16" teak plywood.
I might also add that I have replaced all the tiny factory screws with larger screws in every area of the camera
Bookmarks