Tri-X 320 Development times with HC-110

[natelfo]

Hi. I am relatively new to large format and have only shot T-Max 100 in 4x5 so far. I decided to try Tri-X 320 and would like to know what development times are recommended by people experienced with this film. Particularly, I will be shooting at ISO 200 to start off with, and developing with HC-110 (I usually use dilution H) at 70/21 degrees, and I use a Jobo rotary tank with a Beseler motor base. I know Kodak's times for TX-400 are screwed up, but I am not sure about 320. Anyway, I know development times vary according to scene contrast, I am just looking for good starting times from people experienced with this film who use the same type of development setup as I do. Thanks for your help!

[natelfo]

I'm sorry, I did not mean to post this in the Digital Processing forum. Can this post be moved to the proper forum please. Thank you.

[GSX4]

Try 7 minutes with HC110 dilution H. This is with constant agitation in a uniroller tank. Film rated @ about 200. Negs should be good.