Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: large format parts? for use in a digital camera camera enclosure

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Feb 2008
    Posts
    6

    large format parts? for use in a digital camera camera enclosure

    i'm working on an enclosure for a time lapse project with a digital camera. i'm trying to figure out a controlled way to adjust the position of the camera within the enclosure. perhaps i could repurpose some large format camera parts to do the job.

    any advice on relatively inexpensive parts? or even a kit? (is it possible?)

  2. #2

    Join Date
    Nov 2008
    Location
    Atlanta, GA
    Posts
    669

    Re: large format parts? for use in a digital camera camera enclosure

    Probably not enough info, but sounds like something for which you might use stepper motors and gears. McMaster-Carr might be a good source, or other sources used by those interested in robotics.

  3. #3

    Join Date
    Feb 2008
    Posts
    6

    Re: large format parts? for use in a digital camera camera enclosure

    McMAster-Carr looks interesting although i'm not sure how to find solutions to my problem.

    I'm not looking for robotics. fingers can make the adjustments.

  4. #4

    Join Date
    Nov 2008
    Location
    Atlanta, GA
    Posts
    669

    Re: large format parts? for use in a digital camera camera enclosure

    Why don't you describe precisely what it it you're trying to do?

  5. #5

    Re: large format parts? for use in a digital camera camera enclosure

    You might search EBAY for Arca Swiss or Linhof parts. Many of those can be found as geared movements, which hopefully would provide accurate control.

    Other than that, you could go for Edmund Scientific. They offer lots of staged movement pieces and mounting blocks that are geared. Prices are perhaps a bit higher than used large format.

    Bogen/Manfrotto also offer some geared camera mounts and tripod head. Depending upon accuracy or markings, those might work quite well for you.

  6. #6

    Join Date
    Nov 2008
    Posts
    182

    Re: large format parts? for use in a digital camera camera enclosure

    How many axes do you need to move the camera in: X, Y, Z, rotate horizontally, rotate vertically, etc.? How far on each axis do you need to move the camera?

    XY focus rails are readily available on ebay if you only need to move it a few inches. If you need rotation, take a look at spherical pano heads like Nodal Ninja.

    I used aluminum extrusions from http://www.8020.net (they also have an ebay outlet) to build an XYZ stage for macro photography.

  7. #7

    Join Date
    Oct 2008
    Posts
    127

    Re: large format parts? for use in a digital camera camera enclosure

    My solution for this is simple if you have it around, otherwise it might be too expensive: Lego! It's easy to build a small platform that is being turned, just add some small gears that turn larger gears and it'll go extremely slow. Or add a radial drive to make it even slower.

  8. #8

    Join Date
    Feb 2008
    Posts
    6

    Re: large format parts? for use in a digital camera camera enclosure

    the 8020 stuff looks great although i'd like to find something smaller.

    i'll try to describe it in better detail -

    inside the enclosure, i'd like to be able to move the camera in the following directions
    - closer or further away from the window on the enclosure
    - vertically, an inch or two
    - tilting the camera up or down (not sure thats a good description) but this looks like it might take care of it -

    http://www.bhphotovideo.com/c/produc...ling_Base.html

    I should also add that precision isn't necessarily as important as the ability to lock things down. The camera is likely to be positioned once. it may need to be serviced after that but hopefully a quick release plate will allow for easy removal and replacement with little camera movement.

  9. #9

    Join Date
    Nov 2008
    Posts
    182

    Re: large format parts? for use in a digital camera camera enclosure

    Quote Originally Posted by mattkime View Post
    the 8020 stuff looks great although i'd like to find something smaller.

    i'll try to describe it in better detail -

    inside the enclosure, i'd like to be able to move the camera in the following directions
    - closer or further away from the window on the enclosure
    - vertically, an inch or two
    - tilting the camera up or down (not sure thats a good description) but this looks like it might take care of it -

    http://www.bhphotovideo.com/c/produc...ling_Base.html

    I should also add that precision isn't necessarily as important as the ability to lock things down. The camera is likely to be positioned once. it may need to be serviced after that but hopefully a quick release plate will allow for easy removal and replacement with little camera movement.
    A pan and tilt head mounted on a 4 way focus rail like this, http://cgi.ebay.com/4way-Macro-focus...item414badb31a, will give you all the movements except vertical. Since you're only positioning it once, the vertical could be done with shims or blocks.

    I'd probably just mount the pan and tilt head on a piece of exterior grade plywood, position the camera, and screw it all down to the floor of the enclosure.

  10. #10

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: large format parts? for use in a digital camera camera enclosure

    Quote Originally Posted by el french View Post
    A pan and tilt head mounted on a 4 way focus rail like this, http://cgi.ebay.com/4way-Macro-focus...item414badb31a, will give you all the movements except vertical. Since you're only positioning it once, the vertical could be done with shims or blocks.

    I'd probably just mount the pan and tilt head on a piece of exterior grade plywood, position the camera, and screw it all down to the floor of the enclosure.
    That would never support the weight or move far enough in any direction for large format. You would need something more like this:
    http://www.novoflex.com/en/products/.../castel-cross/

Similar Threads

  1. post alternative techniques
    By Emil Schildt in forum Image Sharing (LF) & Discussion
    Replies: 4029
    Last Post: 28-Apr-2023, 10:16
  2. choosing a large format camera
    By C Jones in forum Cameras & Camera Accessories
    Replies: 24
    Last Post: 15-Jul-2009, 00:07
  3. Need some direction with Large Format camera
    By Rudy81 in forum Cameras & Camera Accessories
    Replies: 18
    Last Post: 21-Sep-2006, 09:36
  4. Digital Backs for large format photography
    By Eleanor Skan in forum Digital Hardware
    Replies: 5
    Last Post: 26-Sep-2001, 14:03
  5. Use of large format enlarging lens on camera
    By Mike Dodd in forum Lenses & Lens Accessories
    Replies: 1
    Last Post: 22-Jan-1998, 11:28

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •