Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Exposing Tri-X

  1. #1

    Exposing Tri-X

    Hello.

    I'm planning to shoot some Tri-X Pan 320 4x5 sheets and am wondering at which iso to shoot it. Is it best to shoot it at 320, faster, slower? or is it a matter of taste.

    I've heard that for color print film you're best over exposing 1/3 stop since you'll get more color.

    W/ BW, is there any advantage to shooting at a different ISO than rated (unless of course you want to push the film).

    Thank you!

    Sal

  2. #2

    Join Date
    Mar 2002
    Location
    now in Tucson, AZ
    Posts
    2,258

    Re: Exposing Tri-X

    The curve shape of TXP-320, and long experience, suggest that exposing at EI 160 gives a better negative, with more shadow detail than one exposed at box speed. But EVERYONE'S experience, idea of a good negative, and opinion, is different; you'll find that out as more people respond to this thread. The best advice is to do your own exposure/development tests, and find for yourself what looks good. But I'd start those tests at EI 160.

  3. #3
    Richard M. Coda
    Join Date
    Mar 2001
    Location
    Scottsdale, AZ
    Posts
    974

    Re: Exposing Tri-X

    Testing... it's the only way.

    My tests came out at 250 for "N" in HC-110 @ 75 deg.
    Photographs by Richard M. Coda
    my blog
    Primordial: 2010 - Photographs of the Arizona Monsoon
    "Speak softly and carry an 8x10"
    "I shoot a HYBRID - Arca/Canham 11x14"

  4. #4

    Join Date
    Mar 2007
    Location
    Toronto, Ontario, Canada
    Posts
    219

    Re: Exposing Tri-X

    Sal;
    First, you will get many different answers on this one!
    Basically, you have an enormous amount of flexibility on how you process your film with B&W. If you haven't already do some research on pushing(less exp and more dev) and pulling (more exp and less dev). Ansel Adams created the Zone system to be able to match the processing of the film to the scene, so that one can get the best and most consistent negs. It is rather involved, and even if you don't choose to actually go to the work of setting it up yourself, it is worth reading about.
    There is a tremendous amount of info out there, on this forum and many others. Will you be doing the processing yourself, or will you be having a lab do it?
    I have a few suggestions, but I am assuming that you have the basic knowledge of B&W film processing.
    Much depends on what you want, and how you will print, or scan your negs when you've got an image that you like.
    Tri-X is a fine film and has been favoured by many for years. It works well and is quite predictable.
    To start with, expose a couple of sheets of an outdoor scene with a mix of subjects, a normal, that is set your meter to 320 then take a reading, and perhaps varying the exposure up or down a half stop. Process normal. If you're doing it yourself, use something like Kodak D-76, pay careful attention to temperature and time in the developer. To get some start times, you can do a search for the "massive developer chart", it contains processing info about many different films. If you're at lab, just ask them for normal for that film.
    When dry, look at your negs. They should have a nice tonal range from highlights through to detail in the shadows.
    Anyway, I hope that this helps. This is only the tip of the iceberg! There is lots more info!
    Keith

  5. #5

    Join Date
    Sep 2003
    Location
    God's Country
    Posts
    2,077

    Re: Exposing Tri-X

    Sal,

    Take a look at the following FP4+ discussion:

    http://www.largeformatphotography.in...ad.php?t=48403

    Different films but similar principles/comments/suggestions.

    Cheers
    Life in the fast lane!

  6. #6
    おせわに なります! Andrew O'Neill's Avatar
    Join Date
    Sep 2003
    Location
    Coquitlam, BC, Canada, eh!
    Posts
    4,358

    Re: Exposing Tri-X

    W/ BW, is there any advantage to shooting at a different ISO than rated
    Yes. By using a lower ISO, you are sliding your shadows higher up on the curve, therefore giving them more luminosity.
    You should do your own testing, because as you say, it's a matter of taste.

  7. #7
    3d Visual Effects artist
    Join Date
    Jul 2007
    Location
    Culver City, CA
    Posts
    1,176

    Re: Exposing Tri-X

    I expose it at 320, but usually air on the side of a bit more exposure. That works for me.
    Daniel Buck - 3d VFX artist
    3d work: DanielBuck.net
    photography: 404Photography.net - BuckshotsBlog.com

  8. #8

    Join Date
    Aug 1999
    Location
    Manhattan
    Posts
    21

    Re: Exposing Tri-X

    I like EI 250 for average subjects, and err on the high side (more exposure, lower EI) when estimating the correction for bellows extension.
    Skip

  9. #9
    Resident Heretic Bruce Watson's Avatar
    Join Date
    Sep 2003
    Location
    USA, North Carolina
    Posts
    3,159

    Re: Exposing Tri-X

    Quote Originally Posted by Salvatore Formisano View Post
    I'm planning to shoot some Tri-X Pan 320 4x5 sheets and am wondering at which iso to shoot it. Is it best to shoot it at 320, faster, slower? or is it a matter of taste.
    For me it's a matter of testing. Do the Zone System tests to find your personal EI and your normal development times. This takes into account how you expose your film, your developer, and the way you process the film in said developer. Without doing the tests, you are just guessing. Why guess when you can know?

    Bruce Watson

  10. #10

    Join Date
    Mar 2008
    Location
    Vero Beach, Florida
    Posts
    281

    Re: Exposing Tri-X

    Buy a copy of Bruce Barlow's CD "Finely Focused: Mechanics and Creativity in Large Format Photography". It has a step by step procedure for film testing. Best $25 you can invest. It will save you time and effort in the long run and reward you with what you want, proper exposure and development.

Similar Threads

  1. HC 110 Tri x Developing times w/jobo
    By walterb in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 17-Dec-2007, 19:23
  2. exposing fuji astia
    By adrian tyler in forum Darkroom: Film, Processing & Printing
    Replies: 6
    Last Post: 23-Apr-2006, 08:22
  3. T Max 100, how does it compare to Tri X, Hp5?
    By Ed Burlew in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 22-Sep-2001, 14:27

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •