Results 1 to 5 of 5

Thread: Nielson Frame quality question

  1. #1

    Join Date
    Jan 2001
    Posts
    150

    Nielson Frame quality question

    I am thinking of using Nielson frame #11 in mat black for my framing of photos. It is slim profile: 3/4" deep, 1/4" wide on the face. I am planning on ordering my frames from Daniel Smith suppliers in that their prices are superb. Interesti ngly though Nielson makes two qualities of this basic frame. One is called #11 a nd the other #11 "basic". Customer service tells me that they are identicle in l ook, but the "basic" is lighter weight metal and thus explains why the price is half of the "regular" model. They only advise that you don't use a piece longer than 24" with this cheaper variety.

    Does anybody have any experience with the difference between these two offerings and any advice for me...

    Scott

  2. #2

    Nielson Frame quality question

    I find the space (height) allowed by the #11 for the mat and other materials too little. Before buying the #11, be sure that your stuff will fit: add up the thickness of the glazing, overmat, back mat, foamboard or such if used, and an allowance for space for the springs. The #12 profile has the same face width but is deeper.

  3. #3
    Robert A. Zeichner's Avatar
    Join Date
    Feb 1999
    Location
    Southfield, Michigan
    Posts
    1,129

    Nielson Frame quality question

    For smaller prints, the profile #11 is fine except that you should know going in, that if using 4-ply mount board, 4-ply overmat and 3/16" foamcore for backing, you will not have room for the spring clips that come with the frame section pairs. This combination does, however just fit perfectly into that frame moulding and so the clips aren't really needed.

    My preference is for profile #15 which is a bit beefier, is available in all the same anodized finishes and allows the use of those clips. My frame sizes are typically 24 x 30 though and so a heavier frame is apprpriate considering the weight of glass etc.

    Boy, I haven't heard reference to Daniel Smith in a long time. When I was last in Seattle, I stopped in and was very impressed with what I saw. I still have the 1992 catalog, I was so taken by that store.

  4. #4

    Nielson Frame quality question

    Scott:

    The Daniel Smith catalog indicates that the dimensions for each style are identical: 13/16" thick with a 13/32" space for mat board, glass, etc. The catalog also says that the Style Basic 11 is made with slightly thinner aluminum extrusions and not recommended for work over 24" unless reinforced. They don't indicate how you might reinforce these frames for larger projects. Neither the basic or the standard style 11 are recommended in lengths greater than 36".

    The Syle 15 frame gives you more room, with 19/32" available for your materials and photo. The Style 15 profile, however, is rounded and may or may not appeal to you on artistic grounds. My personal preference is for the wood frames in natural or black. The wood is more expensive and involves slighly more effort but provides (IMHO) a more refined appearance.

    ...........................................

  5. #5

    Join Date
    Sep 2000
    Location
    Farmington, MI
    Posts
    206

    Nielson Frame quality question

    For what its worth: I use Nielsen #11 or #33 for smaller frames (to 16x20) and #55 for larger sizes. #55 is heavier and spaces the glass away from the artwork. By the way, I don't use the spring clips. I find it better to use a thickness of materials that fills the frame without them. This allows the artwork to expand and contract freely. For backer material I use Light Impressions acid free corrugated board, as many layers as required.

Similar Threads

  1. Viewing frame question
    By Chris S in forum Gear
    Replies: 10
    Last Post: 7-Feb-2006, 09:48
  2. Frame costs
    By Richard C. Trochlil in forum Resources
    Replies: 7
    Last Post: 29-Apr-2002, 07:02
  3. 14 x 18 frame sources
    By Alan E. Barton in forum Business
    Replies: 5
    Last Post: 4-Sep-2001, 11:59
  4. German frame sizes
    By Doug Paramore in forum On Photography
    Replies: 3
    Last Post: 24-Oct-2000, 09:37
  5. Question of quality of Schnieder 210 5.6
    By Neil Cowley in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 26-May-1999, 00:56

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •