I have owned a Polaroid 110A that I had converted by four designs company many years ago to shoot Polaroid pack film. I also have been shooting Polaroid 4x5 film with a 545 holder in my old speed graphic. With the discontinuation of the 4x5 Polaroid sheet film, I decided to start using the Fuji pack film and the 550 holder.
I did a little research and ran across all the various Polaroid 4x5 conversions such as the Razzel and the Littman, and Noah Schwartz. I also looked in my junk box and found another Polaroid 110A and a Polaroid 900, which has the rather nice range finder. I also found a super speed crown graphic with a very nice Graflock back.
for various reasons, I am interested in putting the door, bellows and lensboard from the 110A on the 900. It looks like the rivets could be removed from the door hinge, and the range finder arm, and things could be re-riveted.
I would like to correspond with someone who is knowledgeable about how to remove and replace the door to these cameras, if it can be done..... Curious to know if the rivets can be reused, or if some kind of bolts would work better.
Thanks for any replies,