Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Film Developer Combinations

  1. #1

    Film Developer Combinations

    At risk of the same (very polite) approbation that befell the last person to ask about shortcuts to zone system calibration can anyone advise me on a good film developer combination to start with? After all, if Im going to commit to using one combination for a year Id like to make a good choice at the outset.

    My priorities are sharpness (Im aiming for tack sharp, never having got past pi n sharp with 35mm) and tonal gradation.

    The field at present is FP4/ID-11 or Delta 100/ID-11. Ive heard some good thing s about Tmax 100 and like the sound of XTOL, but havent tried this out myself y et.

    How significant is the format? Will 5x4 and roll film behave the same with N-1, N+1 manipulations (taking account of the core development time differences)?

    Thanks in advance Nick

  2. #2

    Join Date
    Nov 1998

    Film Developer Combinations

    Delta 100 in Xtol 1:1 or 1:2. Delta emulsions are the same in all formats.

  3. #3

    Film Developer Combinations

    T-Max 100 in Photographer's Formulary BW-2 developer.

    See what we meant when we said you'd have to test for yourself? We all have our favorite combinations and techniques. The key is to get to know your tools, in this case the film/develope r combination, so you can refine your technique and predict what you'll see on paper before you trip the shutter.

    One of my favorite black-and-white negatives I printed last year was on T-Max 10 0 developed in HC-110. Beautiful highlight separation, rich detail in the blacks, smooth grays through the mid tones. Ah, but my absolute favorite was T-Max 100 in BW-2. That's why I'm sticking with it.

    I tried Delta 100 and didn't like the results. That does not mean John is giving you bad advice. It just means we have different techniques and use different tools to reach a similar goal. I like the results I get with T-Max 100, and I'd be willing to bet a few dollars that I'd like the results John gets with Delta 1 00.

    Pick a film/developer combination from of the newer emulsions and developers, th en go forth and shoot. You'll have fun and learn a few things along the way. Don't stress about mistakes, they're p art of the process.

  4. #4

    Join Date
    Feb 1999

    Film Developer Combinations

    Darron is correct, I could tell you I like tri-x plates in tmax but would have to give 500 words on the agitation alone much less what specific lighting condition m I don't think it's necessary to burn 100 sheets of delta to find your film speed although I know several teachers who would disagree. You can abbreviate your testing by keeping detailed logs and sticking to one developer and one film until you found a your normal and percentages for expansion and contraction. I like using developers at full strength and in my part of the country the lighting conditions almost always exceed the spread capabilities of the film. These requirements significantly reduce my options for a "universal" developer. In this case Tmax developers won't work undiluted. So I shift to a developer that has a very long dev time at full strength so I can contract. Think before you leap and you'll save your money, sanity and love for photography. Good luck.

  5. #5

    Join Date
    Jan 1998

    Film Developer Combinations

    Here's some advice from a klutz: 1. I find liquid developers are easier to mix accurately. 2. I think one shot developers are (opinions differ on this point) easier to mix accurately and trust for testing purposes (isn't BW-2 a replenished developer? I can't remember.) 3. TMax is a hell of a lot harder to use than Tri-X.

    So being a klutz with less than ideal equipment (slightly cranky light meter, antique shutters, etc.) I eventually found myself frustrated with Tmax & D76 and used Tri-X with HC110. Shortly after that I ran out of money, having spent it all on tests, and began using exclusively Arista 125 film (nearly half the price) and Rodinal, and winging it. I'm delighted with the results. I guess what I'm trying to say is that the rigidity of the "try one combination for a year" advice sounds pretty good but I think you need to allow yourself some wiggle room at the beginning. I just plain don't like Tmax, but forced myself to use it for quite a while anyway, on the basis of advice that I knew was arbitrary but since I was just embarking on this cursed endeavour one combination was just as good as another. When I stumbled onto Tri-X I liked it a great deal and I would use it still but I am happy enough with the cheaper emulsion (37.00/100 sheets) to stick with it.

    If you have quite a bit of experience with 35 mm maybe you should stick with the emulsions you preferred in that format.

  6. #6

    Join Date
    May 1998

    Film Developer Combinations

    It might be just me, but I find that there is less difference between different 5x4 films than between 35mm films. I suppose this is because I enlarge 5x4 much less than I enlarge 35mm, and grain just doesn't show. For example, there is a big difference between HP5+ and Delta 400 in 35mm, but (for me) far less difference in 5x4.

    In 5x4, I use Delta 100 and Delta 400, developed in Paterson FX39. As implied by the other responses, what works well for me may not work for you.

  7. #7

    Film Developer Combinations

    Try Delta 100 & 400 in PMK Pyro (nominal starting time 10 minutes @ 70F), or Tri-X 4164 in Rodinal 1:50 (nominal starting time 9 minutes @ 70F). Incidentally, both of these combinations work well with N- minus development. (The Rodinal can be diluted to 1:100 for even more control.)

    I dislike T-Max intensely. Not only is the development finicky, not only does it take forever to fix, not only does it exhaust the fixer prematurely, but the emulsion is extremely soft and prone to scratching. And it has absolutely nothing to offer over the films I mentioned above.

  8. #8

    Join Date
    Oct 1998

    Film Developer Combinations

    In LF: APX100 in Rodinal, that's special and TriX in HC110 for predictable results. In 35mm TriX in HC110 for available light or FUJI Neopan in HC110 for less available light and Delta100 in Xtol (is close to FX39 but cheaper) in summer.

  9. #9

    Join Date
    Sep 1998

    Film Developer Combinations

    I'm another fan of the Delta 100 & 400 with Xtol 1:2 combination -IF- you are using tubes or some kind of rotary processor. Dilute Xtol requires a lot of agitation--my results using it for sheet film in a small tank were terrible.

  10. #10

    Join Date
    Nov 1998

    Film Developer Combinations

    > is a big difference between HP5+ and Delta 400 in 35mm, but (for me) > far les s difference in 5x4.

    The big difference I see between the two films is in spectral sensitivity; Del ta 400 has somewhat less red sensitivity than HP5+, which makes for darker skin tones. Although this may actually be more accurate, I'm used to old-fashioned-film sk in tones so it bothers me a little. BTW, as for developing, I'm doing all 4x5 and 8x10 sheet film in Unicolor prin t drums on a Uniroller. Works great!

Similar Threads

  1. Film/developer/paper/developer combination
    By Sal Santamaura in forum Darkroom: Film, Processing & Printing
    Replies: 4
    Last Post: 31-May-2004, 21:53
  2. Developer for Arista Film
    By Kevin Crisp in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 28-Dec-2001, 20:02
  3. B+W film developer
    By Max_2342 in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 25-Sep-2001, 10:49
  4. Focal Length of Convertible Lens Combinations
    By Keith Pitman in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 2-Jun-2001, 14:00
  5. Contact printing paper/ chem. will any combinations work?
    By Jules Hancock in forum Darkroom: Film, Processing & Printing
    Replies: 7
    Last Post: 15-Dec-2000, 18:32


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts