Results 1 to 7 of 7

Thread: leaking Unicolor Drum

  1. #1

    leaking Unicolor Drum

    I have a Unicolor drum which is leaking pretty badly. I checked the gasket seal and the rubber under the seal and they look fine. Does anyone have any ideas o n how to correct these leaks?

    Thank, Ken

  2. #2

    leaking Unicolor Drum

    The plastic dogs(the little plastic ears that latch the lid to the drum) get worn and start allowing the drum to leak. Get a thin sheet of poly eurathane and cut a spacer and place between the gasket and lip of the drum. It makes the gasket a little thicker and seals it right up like new. james

  3. #3

    leaking Unicolor Drum

    Mine leaked badly too, yet the the gasket appeared to be perfect; and the drum and lid were pristine. But when I replaced gasket with a new one that a friend had laying around, the leaks stopped.

    Does anyone know if you can buy replacement gaskets commercially?

  4. #4

    Join Date
    Jan 2000
    Posts
    91

    leaking Unicolor Drum

    Try holding it with pliers over a hot stove eye a few seconds at a time. I had one to leak and kept heating it and trying it till the leak was fixed.

  5. #5

    Join Date
    Sep 1998
    Location
    Mobile, AL
    Posts
    552

    leaking Unicolor Drum

    David, I have seen gaskets for sale on ebay with a starting bid of $10 periodically. Look in the darkroom section of photo items.

  6. #6

    leaking Unicolor Drum

    Thank you all for your help. I have inserted a second plastic washer and it seems to have stopped the leak.

    Best regards,

    Ken

  7. #7

    leaking Unicolor Drum

    I also have a leaking unicolor 8x10 drum. Where do you place the plastic? Between the lip of the drum and the gasket of the cover?

    Irwin

Similar Threads

  1. Unicolor FILM drum
    By Steve H in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 5-Jan-2006, 15:02
  2. Unicolor drum problems
    By Michael Pry in forum Darkroom: Film, Processing & Printing
    Replies: 19
    Last Post: 9-Mar-2004, 07:54
  3. Unicolor Drum/Xtol/HP5+
    By Ed Balko in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 6-Mar-2004, 15:55
  4. Unicolor 8x10 drum
    By Carl Couchman in forum Announcements
    Replies: 2
    Last Post: 8-Jul-2001, 00:48
  5. Processing B&W in a Unicolor drum
    By David Grandy in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 27-Apr-1999, 12:48

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •