Screen Cezanne Users Unite

[kshaub103]

Adaptec ASC-29160 is the 68pin which is what I received. Does anyone have experience using this card. I understand that screen support Adaptec ASC-29160n which is the 50pin I'm curious if I can use a 68pin to 50 pin adapter. Adaptec is using the same drive for both cards.

[kshaub103]

Any one want to share a manual for the s5000?

[Corran]

So I have been looking for a 29160N for a second G4 for a while. I ended up finding a 29160 which from my research is the 64-bit version, or something to that effect. I bought it and tried it out with my Cezanne, assuming it would be backwards compatible to 32-bit...and it doesn't work. It detects the scanner and everything seems to connect but then it won't preview and errors out. So I would possibly avoid that one. And if you see a 32-bit N model...I need it!

The sucky thing is a 32-bit model came up on eBay while I waited for the 64-bit one I bought to arrive. By the time I figured out it wouldn't work it got sold .

Be careful, the one in my G4 is a model ADP, not ASC. I believe, but am not 100% sure, that the ASC model is for PC and the ADP is for MAC. Mine has a sticker that says MAC on it. Many of the ASC ones I've seen say DELL.

[coisasdavida]

So I have been looking for a 29160N for a second G4 for a while. I ended up finding a 29160 which from my research is the 64-bit version, or something to that effect. I bought it and tried it out with my Cezanne, assuming it would be backwards compatible to 32-bit...and it doesn't work. It detects the scanner and everything seems to connect but then it won't preview and errors out.

Did you delete the Adaptec 78xx Kext?

[Corran]

Hi Guilherme - thanks for the suggestion. I just Googled it and discovered how to do that. It unfortunately did not help.

I took another look at the error message - perhaps someone can give me a hand. What I did was mirror my old identical G4's harddrive onto a fresh drive for this computer. Everything works more or less - I of course start the Server program, and connect in ColorGenius. When I click Preview as normal, it gives me this error message - "error in user parameter list." I thought it was just a setting in CG but everything is set as I normally have it.

When I start up the Maintenance program, it immediately gives me the error "LoadDriver Error occurred - Number 43 unknown." Hence my assumption that there is a problem with the SCSI card compatibility.

[coisasdavida]

Hence my assumption that there is a problem with the SCSI card compatibility.

If you ran Maintenance app, I assume OS9, so two things to check:

In the System Profiler, check the Deviced tab is Cezanne is there and/or if the SCSI card is there as a SCSI card

[Corran]

I am using OSX, and Color Genius 2. The Maintenance, or maybe it's called Maintainer app is the one from Screen that runs diagnostics on the scanner.

Under the Devices information it does register the SCSI card and the Screen scanner. The Server app runs fine and "connects" to the scanner. Not sure where the issue is between the Server and actual CG2 software.

[coisasdavida]

The Maintainer will only run in OS9, at least on my CD which is CG 2.0.7
Server and CG2 run on OSX.

Did you try trashing your CG preferences?

[Corran]

Weird, the Maintainer application works on my other G4, also OSX and CG2. I will try once again fooling with the settings - but I'm fairly sure I've reset all of the preferences multiple times. I don't know what it means by "user parameter list" though.

[kshaub103]

Getting an error 1003 any ideas?