Page 77 of 79 FirstFirst ... 27677576777879 LastLast
Results 761 to 770 of 788

Thread: Screen Cezanne Users Unite

  1. #761

    Join Date
    Dec 2015
    Posts
    13

    Re: Screen Cezanne Users Unite

    Adaptec ASC-29160 is the 68pin which is what I received. Does anyone have experience using this card. I understand that screen support Adaptec ASC-29160n which is the 50pin I'm curious if I can use a 68pin to 50 pin adapter. Adaptec is using the same drive for both cards.

  2. #762

    Join Date
    Dec 2015
    Posts
    13

    Re: Screen Cezanne Users Unite

    Any one want to share a manual for the s5000?

  3. #763
    Corran's Avatar
    Join Date
    Apr 2011
    Location
    GA, USA
    Posts
    4,946

    Re: Screen Cezanne Users Unite

    So I have been looking for a 29160N for a second G4 for a while. I ended up finding a 29160 which from my research is the 64-bit version, or something to that effect. I bought it and tried it out with my Cezanne, assuming it would be backwards compatible to 32-bit...and it doesn't work. It detects the scanner and everything seems to connect but then it won't preview and errors out. So I would possibly avoid that one. And if you see a 32-bit N model...I need it!

    The sucky thing is a 32-bit model came up on eBay while I waited for the 64-bit one I bought to arrive. By the time I figured out it wouldn't work it got sold .

    Be careful, the one in my G4 is a model ADP, not ASC. I believe, but am not 100% sure, that the ASC model is for PC and the ADP is for MAC. Mine has a sticker that says MAC on it. Many of the ASC ones I've seen say DELL.
    Bryan | Blog | YouTube | Instagram
    All comments and thoughtful critique welcome

  4. #764
    Guilherme Maranhão coisasdavida's Avatar
    Join Date
    Apr 2012
    Location
    São Paulo, Brazil
    Posts
    299

    Re: Screen Cezanne Users Unite

    Quote Originally Posted by Corran View Post
    So I have been looking for a 29160N for a second G4 for a while. I ended up finding a 29160 which from my research is the 64-bit version, or something to that effect. I bought it and tried it out with my Cezanne, assuming it would be backwards compatible to 32-bit...and it doesn't work. It detects the scanner and everything seems to connect but then it won't preview and errors out.
    Did you delete the Adaptec 78xx Kext?
    Last edited by coisasdavida; 26-Sep-2017 at 02:59. Reason: spelling

  5. #765
    Corran's Avatar
    Join Date
    Apr 2011
    Location
    GA, USA
    Posts
    4,946

    Re: Screen Cezanne Users Unite

    Hi Guilherme - thanks for the suggestion. I just Googled it and discovered how to do that. It unfortunately did not help.

    I took another look at the error message - perhaps someone can give me a hand. What I did was mirror my old identical G4's harddrive onto a fresh drive for this computer. Everything works more or less - I of course start the Server program, and connect in ColorGenius. When I click Preview as normal, it gives me this error message - "error in user parameter list." I thought it was just a setting in CG but everything is set as I normally have it.

    When I start up the Maintenance program, it immediately gives me the error "LoadDriver Error occurred - Number 43 unknown." Hence my assumption that there is a problem with the SCSI card compatibility.
    Bryan | Blog | YouTube | Instagram
    All comments and thoughtful critique welcome

  6. #766
    Guilherme Maranhão coisasdavida's Avatar
    Join Date
    Apr 2012
    Location
    São Paulo, Brazil
    Posts
    299

    Re: Screen Cezanne Users Unite

    Quote Originally Posted by Corran View Post
    Hence my assumption that there is a problem with the SCSI card compatibility.
    If you ran Maintenance app, I assume OS9, so two things to check:

    In the System Profiler, check the Deviced tab is Cezanne is there and/or if the SCSI card is there as a SCSI card

  7. #767
    Corran's Avatar
    Join Date
    Apr 2011
    Location
    GA, USA
    Posts
    4,946

    Re: Screen Cezanne Users Unite

    I am using OSX, and Color Genius 2. The Maintenance, or maybe it's called Maintainer app is the one from Screen that runs diagnostics on the scanner.

    Under the Devices information it does register the SCSI card and the Screen scanner. The Server app runs fine and "connects" to the scanner. Not sure where the issue is between the Server and actual CG2 software.
    Bryan | Blog | YouTube | Instagram
    All comments and thoughtful critique welcome

  8. #768
    Guilherme Maranhão coisasdavida's Avatar
    Join Date
    Apr 2012
    Location
    São Paulo, Brazil
    Posts
    299

    Re: Screen Cezanne Users Unite

    The Maintainer will only run in OS9, at least on my CD which is CG 2.0.7
    Server and CG2 run on OSX.

    Did you try trashing your CG preferences?

  9. #769
    Corran's Avatar
    Join Date
    Apr 2011
    Location
    GA, USA
    Posts
    4,946

    Re: Screen Cezanne Users Unite

    Weird, the Maintainer application works on my other G4, also OSX and CG2. I will try once again fooling with the settings - but I'm fairly sure I've reset all of the preferences multiple times. I don't know what it means by "user parameter list" though.
    Bryan | Blog | YouTube | Instagram
    All comments and thoughtful critique welcome

  10. #770

    Join Date
    Dec 2015
    Posts
    13

    Re: Screen Cezanne Users Unite

    Getting an error 1003 any ideas?

Similar Threads

  1. Screen Cezanne FT s5000 scanner
    By hbjornson in forum Digital Hardware
    Replies: 9
    Last Post: 29-Sep-2015, 05:41
  2. feedback: long time Maxwell Screen users?
    By Arne Norris in forum Cameras & Camera Accessories
    Replies: 19
    Last Post: 18-Jan-2008, 01:42
  3. Screen Cezanne Elite Questions
    By Tim Shawcross in forum Digital Hardware
    Replies: 1
    Last Post: 27-Jul-2007, 06:27
  4. Initial Report: Maxwell Screen on Wista DX II
    By John Hollenberg in forum Cameras & Camera Accessories
    Replies: 7
    Last Post: 15-Sep-2003, 19:37

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •