Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Unbreakable GG - any interest?

  1. #1

    Join Date
    Mar 1999
    Posts
    100

    Unbreakable GG - any interest?

    Andrea's recent thread brought this to mind, but rather than piggyback on it I t hought I'd ask my own question here.

    I've recently developed a virtually unbreakable ground glass for LF backpackers and others who either subject their cameras to rough use and/or are a long ways from a replacement (or otherwise can't afford to lose the use of their focusing screen). In a side-by-side test, the resolution of the working prototype is app rox. the same as a "regular" ground glass and it may have been a hair brighter. It's as light or lighter than a regular gg and shouldn't cost much more. (i.e. this is no "super screen" like the Maxwell or Boss, either in performance or pr ice.)

    I'm too busy to market this myself, so I'm thinking of approaching one of the do mestic LF manufacturers (Wisner, Canham) and see if they want to handle distribu tion or licensing. At this point, my question is: Is anyone interested in a bul letproof ground glass, or is this such a niche product that it's not worth the e ffort?

    Thanks for any input.

  2. #2

    Unbreakable GG - any interest?

    Well done Mark! That's the spirit, let's bring some fresh air into large format photography! That's what I was aiming at by asking inventors and improvers to come forward, I am very curious to know how it will develop. My best wishes.

  3. #3

    Unbreakable GG - any interest?

    Having stupidly broken the GG on my 8x10 (I released the back instead of the bellows) and spent $140 to replace it, I think this would sell. Definitely anyone who broke a GG would be interested.

  4. #4

    Unbreakable GG - any interest?

    I haven't yet, but there's always the chance. It'd be neat if it were available with different patters "etched" in - plain, 1" grid, concentric formats, etc.

  5. #5

    Unbreakable GG - any interest?

    I think you have a good idea and would patent it. I agree with licensed manfacturing and distribution.

  6. #6

    Join Date
    Mar 1999
    Posts
    100

    Unbreakable GG - any interest?

    Nah, I'm not going to patent it. If I can't get a mfg interested without too much trouble I'll just post my process here for the DIY- type folks (which probably includes most of you!).

    Cheers!

  7. #7

    Join Date
    Mar 1999
    Posts
    769

    Unbreakable GG - any interest?

    I'd be interested - I'm clumsy enough that I actually broke a GG by pressing the loupe too hard on it. But it was a bitter cold day - so maybe that had something to do with it. Good luck, DJ.

  8. #8

    Unbreakable GG - any interest?

    As a DIY camera builder I would like to see more on the new ground glass prototype--especially if it is easy and inexpensive. I've seen a number of alternative approaches, including the use of polishing grit on plain glass or window "frosting" applied via spray can. My own quick-and-dirty preference has been the use of plexiglass and 220 grit sandpaper on a random orbit palm sander. This technique is particularly good for producing larger viewing screens for 11x14, 8x20,

  9. #9

    Join Date
    Mar 1999
    Posts
    100

    Unbreakable GG - any interest?

    Dave - For some more DIY info check out the reply from Kevin Crisp four lines up. I'm doing something similar to you except I'm using polycarbonate vs. plexi (way more shatter resistant).

    Cheers!

  10. #10

    Join Date
    Feb 2001
    Location
    Los Angeles
    Posts
    2,205

    Unbreakable GG - any interest?

    I have tried this with both Plexiglass and Lexan. Plexiglass doesn't "scuff" the same as Lexan, and I preferred the look of the Lexan. Much less of a hot spot. Plexiglass is not nearly as tough as Lexan, and an impact will break it. Most "bulletproof" (bullet resistant, actually) "glass" these days is made out of this material. The thicker the material the higher rating it gets for stopping bullets. The bullet goes it and melts the plastic as it goes and gets caught. Many retailers of Lexan have little displays where you are invited to beat on a square of the material with a hammer. Anyway, the bottom line is that this type of screen is about as bright as regular ground glass. It can have some texture to it, depending on how much time you want to spend scuffing it up, but this is a minor distraction. You can go with sandpaper, rubbing compound or whatever to suit your taste. With 600 grade sandpaper, the image (in 5X7 anyway) is fairly even with no distracting hotspot or need to move your hand around to see the corners. I have checked for indexing error on my cameras and as long as you use the right thickness and put it in the right way, it is right on the money.

Similar Threads

  1. Interest in lens boxes
    By paul owen in forum Lenses & Lens Accessories
    Replies: 17
    Last Post: 2-Nov-2008, 04:25
  2. Interest in a lense
    By Dirk Luchsinger in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 14-Feb-2006, 19:44
  3. T Max 400 LF and ULF Film Interest
    By Michael Kadillak in forum Darkroom: Film, Processing & Printing
    Replies: 22
    Last Post: 20-Dec-2005, 22:52
  4. [historical interest] This Forum Has Been Migrated To Photo.net
    By Brian Mottershead in forum Announcements
    Replies: 1
    Last Post: 13-Jun-2002, 14:44
  5. Denver area LF interest?
    By Richard Boulware in forum Groups & Meetings
    Replies: 0
    Last Post: 15-Jul-2001, 13:26

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •