Results 1 to 4 of 4

Thread: Help attaching Jobo Lift

  1. #1

    Join Date
    Jul 2007
    Location
    Arkansas
    Posts
    20

    Help attaching Jobo Lift

    I recently purchased a "used" CPE-2 Plus Jobo processor off eBay.
    "Used" meaning it didn't come in the original boxes.

    The previous owner said it had never been used and looking at it,
    it is spotless!

    It came with the Jobo Lift for it (4062).

    My problem.......
    how in the heck do you attach the lift to the processor?

    Looking at the lift for the CPA unit, the lift for that processor
    looks to have a clip on the back of it. There is not one on
    this lift (4062).

    Any help will be appreciated as I'm anxious to use this.
    I cannot find specific instructions for this particular lift.

    Thanks,
    Steve

  2. #2

    Join Date
    Nov 2005
    Location
    Fairfax, Vermont
    Posts
    1,631
    Michael W. Graves
    Michael's Pub

    If it ain't broke....don't fix it!

  3. #3

    Join Date
    Jul 2007
    Location
    Arkansas
    Posts
    20

    Re: Help attaching Jobo Lift

    Been there. Looked at it.
    Doesn't answer my question.
    That link is for the 4072 lift, not the 4062.

  4. #4

    Join Date
    Jul 2007
    Location
    Arkansas
    Posts
    20

    Re: Help attaching Jobo Lift

    When in doubt.....e-mail the place.
    They sent me the info.

    Thanks

Similar Threads

  1. Jobo expert drums and beseler motor base. It can be done!
    By Jorge Gasteazoro in forum Darkroom: Film, Processing & Printing
    Replies: 14
    Last Post: 12-Jun-2010, 03:27
  2. Achilles' Arm -or- The Curse of the Jobo Lift
    By Oren Grad in forum Darkroom: Film, Processing & Printing
    Replies: 28
    Last Post: 18-Jun-2007, 05:29
  3. Jobo vs. Contact Printing Opinions sought
    By audioexcels in forum Darkroom: Film, Processing & Printing
    Replies: 8
    Last Post: 10-May-2007, 21:50
  4. RnR a Jobo CPP2 + lift
    By Matthew Cordery in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 18-Nov-2006, 15:39
  5. Can I attach JOBO lift #4072 to CPE2-Plus?
    By Chan in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 8-Feb-2006, 23:27

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •