Page 1 of 7 123 ... LastLast
Results 1 to 10 of 62

Thread: Converting a 4x5 view camera to a......

  1. #1

    Join Date
    Feb 2007
    Location
    Bangkok, Thailand
    Posts
    11

    Converting a 4x5 view camera to a......

    hi Guys,

    Is it possible to convert a 4x5 view camera into a 4x5 handheld camera with a helciol mount.

    Seems rather simple, wouldn't you just attach both the rear and front plates of a view camera together, seal for light leaks, then attach a helcoil mount to whatever lens board you have and attach lens? offcourse you would have to atleast work out distances for lens to film plane etc.

    And are there any shiftable lens boards that you can attach to most view cameras.

    Want to find a inexpensive way to make a camera that has ability to shift, a variety of backs, and is portable enough to handhold. Any ideas.

    For something that was similair to what l was thinking have a look here
    http://cgi.ebay.com/Handy-TOYO-WIDE-...QQcmdZViewItem

    Thanks in advance.

    Oman

  2. #2

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,408

    Re: Converting a 4x5 view camera to a......

    You slide off the front or the rear standard from a Linhof Kardan, B, 45S, JBL, GT, E, M, RE.

    You put the ground glass back on one side of the standard and the lensboard on the other side.

    Rodenstock and Schneider both make Helicoids with distance and DOF scales for each of their lenses in 0 shutter. They mount to Linhof Kardan boards with a 3 hole.

    If you need added extension you would have to either have cones made - expensive, or use Wista Extension Sets. To use the Wista Extension Sets you would also need a Linhof Kardan to Technika adapter board.

    Now. How do you plan tio view the scene? Ground glass or with a view finder? If with a view finder then you would have to use the front standard of the Kardan as that has an accessory shoe on it.

    Using these standards you would have 3.3" of rise that can be exteded to 6.6" with an accessory. 5.5" of shift, 360° of swing and 75° of center tilt.

    The only thing you would have to "make" is a plate to accept a grip. The Linhof Anatomical Grip comes with a plate with 2 mounting holes in it along with 2 screws. You could just drill and tap 2 holes to mount this plate. The Grip slides onto the plate.

  3. #3

    Join Date
    Jun 2005
    Posts
    2,474

    Re: Converting a 4x5 view camera to a......

    If you want to use shifts your viewfinder will not be too useful, unless you want to carry a set of preset viewfinder masks...

  4. #4

    Join Date
    Jul 2006
    Posts
    2,639

    Re: Converting a 4x5 view camera to a......

    If only the Dagor I have didn't have a broken helical mount, I'd be way ahead of you

  5. #5

    Join Date
    Feb 2005
    Location
    Houston, TX
    Posts
    137

    Re: Converting a 4x5 view camera to a......

    Quote Originally Posted by Bob Salomon - HP Marketing View Post
    Rodenstock and Schneider both make Helicoids with distance and DOF scales for each of their lenses in 0 shutter. They mount to Linhof Kardan boards with a 3 hole.

    If you need added extension you would have to either have cones made - expensive, or use Wista Extension Sets.

    Now. How do you plan tio view the scene? Ground glass or with a view finder? If with a view finder then you would have to use the front standard of the Kardan as that has an accessory shoe on it.

    The only thing you would have to "make" is a plate to accept a grip. The Linhof Anatomical Grip comes with a plate with 2 mounting holes in it along with 2 screws. You could just drill and tap 2 holes to mount this plate. The Grip slides onto the plate.
    Fotoman makes two (2) different Helical Focus Mounts. One short (HFM-S, same extension as the Rodenstock) and one long (HFM-LT) with an additional 10mm of extension. Both accept #00, #0, or #1 shutters, and have calibrated distance and DOF scales.

    We also have many different Cones available, which could easily be affixed to your lensboard if you require additional extension.

    Grip? We have two, but we would have to see if your standard could accept them.

    We also sell accessory shoes, complete with springs and mounting screws, as well as dual axis bubble levels.

    In the end, you could pretty much do anything you wanted to.

  6. #6

    Join Date
    Jun 2005
    Posts
    2,474

    Re: Converting a 4x5 view camera to a......

    Quote Originally Posted by omanoman View Post
    hi Guys,

    Is it possible to convert a 4x5 view camera into a 4x5 handheld camera with a helciol mount.

    Seems rather simple, ....
    Want to find a inexpensive way to make a camera that has ability to shift, a variety of backs, and is portable enough to handhold. ....Oman
    But if you buy the view camera, the helicoid mount, the variety of backs - what in the end do you want to build in an inexpensive way?

  7. #7

    Join Date
    Feb 2007
    Location
    Bangkok, Thailand
    Posts
    11

    Re: Converting a 4x5 view camera to a......

    Quote Originally Posted by Bob Salomon - HP Marketing View Post
    You slide off the front or the rear standard from a Linhof Kardan, B, 45S, JBL, GT, E, M, RE.

    You put the ground glass back on one side of the standard and the lensboard on the other side.

    Rodenstock and Schneider both make Helicoids with distance and DOF scales for each of their lenses in 0 shutter. They mount to Linhof Kardan boards with a 3 hole.

    If you need added extension you would have to either have cones made - expensive, or use Wista Extension Sets. To use the Wista Extension Sets you would also need a Linhof Kardan to Technika adapter board.

    Now. How do you plan tio view the scene? Ground glass or with a view finder? If with a view finder then you would have to use the front standard of the Kardan as that has an accessory shoe on it.

    Using these standards you would have 3.3" of rise that can be exteded to 6.6" with an accessory. 5.5" of shift, 360° of swing and 75° of center tilt.

    The only thing you would have to "make" is a plate to accept a grip. The Linhof Anatomical Grip comes with a plate with 2 mounting holes in it along with 2 screws. You could just drill and tap 2 holes to mount this plate. The Grip slides onto the plate.

    Thanks bob for your help, cant wait to get started, when it comes down to it, could probably go out and buy a silvestri bicam or something like it, but want have something different, something l created, as well as save a little (lot) od cash.
    Thanks again.

  8. #8

    Join Date
    Jun 2005
    Posts
    2,474

    Re: Converting a 4x5 view camera to a......

    Quote Originally Posted by Bob Salomon - HP Marketing View Post
    You slide off the front or the rear standard from a Linhof Kardan, B, 45S, JBL, GT, E, M, RE.

    You put the ground glass back on one side of the standard and the lensboard on the other side.
    ...
    Using these standards you would have 3.3" of rise that can be exteded to 6.6" with an accessory. 5.5" of shift, 360° of swing and 75° of center tilt.
    I just don't get it - once off the rail, what will held both standards together? And how will you get the 360° of swing?

  9. #9

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,408

    Re: Converting a 4x5 view camera to a......

    Quote Originally Posted by GPS View Post
    I just don't get it - once off the rail, what will held both standards together? And how will you get the 360° of swing?
    Each standard accepts the back on one side and the lensboard on the other side. The Standards can swing 360° but that would not be any use when the standard is used alone, hand held.

    Essentially what I described would make the discontinued Linhof Technar with the addition of rise/shift/tilt.

  10. #10

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,408

    Re: Converting a 4x5 view camera to a......

    [QUOTE=Paul Droluk;232450]Fotoman makes two (2) different Helical Focus Mounts. One short (HFM-S, same extension as the Rodenstock) and one long (HFM-LT) with an additional 10mm of extension. Both accept #00, #0, or #1 shutters, and have calibrated distance and DOF scales.

    Paul, Rodestock helicoids, off the shelf, are the correct length for the focal length lens they are designed for and have the proper focusing and DOF scales for the lens that they are made for. These are not universal helicoids. They are specific to the focal length. Therefore they always focus accurately.

    The focus mount and scales on the one for the 28mm Apo Sironar Digital HR is quite a different length then the ones for the 35mm, 45mm, 55mm, 65mm, 75mm, 90mm, 100mm, 120mm, 105mm, 135mm and 150mm lenses.

    Rodenstock also makes a universal helical called the Modular Focus Mount which accepts 25mm long adapter rings to extend its length. They accept enlarging lenses, C mount lenses and mount to T2 mounts, C mounts or Leica thread mounts. Since they are universal they do not have scales. But they do have a focus lock.

    Schneider also has helicoids similar to Rodenstock's.

Similar Threads

  1. Field Camera or View Camera
    By Barret in forum Cameras & Camera Accessories
    Replies: 21
    Last Post: 13-May-2011, 10:32
  2. Difference in B & J 4x5 view cameras
    By Steve Feldman in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 4-Jun-2006, 14:09
  3. 4x10 Canham Holders do NOT fit my Lotus Camera
    By Kerry L. Thalmann in forum Cameras & Camera Accessories
    Replies: 23
    Last Post: 5-Jan-2005, 19:00
  4. Galvin 2 1/4" x 3 1/4" View Camera
    By Francisco Diaz in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 4-Jun-1999, 17:25

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •