Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Calculating new exposure for new print size

  1. #1

    Join Date
    Feb 2000
    Posts
    273

    Calculating new exposure for new print size

    I know that this topic has already been discussed, but I am hoping this time, someone will have a fairly clear answer, if in fact there is one.

    How do you calculate the change in exposure for a change in print size? The inverse square method just doesn't work. I tried the formula in Tim Rudman's book, "The Photographer's Master Printing Course," and, nope, no go. It wasn't that it was a little off. It was WAY off.

    I have been using the old Kodak exposure wheel and it actually seems to work but it is not great for fine tuning. I would like something just a little more accurate.

    Just in case it matters, I am printing with a DeVere 504 dichroic head.

  2. #2

    Join Date
    Sep 2003
    Posts
    1,794

    Re: Calculating new exposure for new print size

    You can use a light meter or better darkroom analyzer.

  3. #3

    Join Date
    Oct 2003
    Location
    Whittier, CA
    Posts
    1,138

    Re: Calculating new exposure for new print size

    I do use Tim Rudman's method, and I find it works.
    Keep in mind that batches of paper are different one from the other and the formula Rudman's offer is not a magic bullet: at the end you will always have to make your own adjustments.

    Silver is not a completely predictable medium as you know.

  4. #4

    Join Date
    Feb 2000
    Posts
    273

    Red face Re: Calculating new exposure for new print size

    Quote Originally Posted by domenico Foschi View Post
    I do use Tim Rudman's method, and I find it works.
    Keep in mind that batches of paper are different one from the other and the formula Rudman's offer is not a magic bullet: at the end you will always have to make your own adjustments.

    Silver is not a completely predictable medium as you know.
    Domenico, this was paper from the same box. I checked and double-checked my numbers, but the enlargement was almost black. I will go back and check again, just in case I was having a bad day. It is good to hear from someone who has used this method that it does work. I also have an Ilford EM10 that I have never used. Maybe it is time to learn how.

  5. #5

    Join Date
    Mar 1998
    Location
    Seattle
    Posts
    133

    Re: Calculating new exposure for new print size

    I use the EM10 for Ilfochrome as well as making enlarged negatives on lith film. It works within a small range of print sizes if you are changing the aperture on your enlarging lense to compensate for exposure.

    If I know ahead of time that I will be making significantly larger prints, I dial in all three colors on the dicro head the same amount when making the smaller print as a neutral density filter. I incrementally open up the same amount on all three color channels when making a larger print and measure the light intensity with the EM10 to keep the exposure time the same. This maintains an optimal aperture for the lens and the same exposure time. It works well for me, but if others have tips and suggestions it would be good to hear.

    Doug

  6. #6

    Re: Calculating new exposure for new print size

    HTML Code:
    This is one of my old rpd posts. It doesn't include reciprocity failure, but for 
    LF's somewhat limited print magnifications, that isn't a problem.
    
    
    Suppose that your 15 sec, 8x10, was an 8X enlargement (old_M = 8) from a 35
    mm negative, and the new magnification (new_M) would be 11X, for an 11x14
    (printed so the 24mm dimension of the negative just fits the paper; the
    long dimension is cropped).  The exposure factors are equal to the
    magnification plus one, squared, so:
    
       new_time           old_time
    ------------   =    ------------  
    (new_M +1)^2        (old_M+1)^2
    
    or...
    
    new_time  =  old_time  x  (new_M +1)^2  / (old_M+1)^2
    
    so:
    
    new_time = 15 sec x (11+1)^2 / (8+1)^2 = 15 x 1.777 = 26.7 sec.                    
    
    To simplfy matters, you can place a masking tape scale on the baseboard so
    overall magnification can be read directly, even for cropped prints (use
    overall magnification, not the cropped print dimension).
    
    Using a spreadsheet, you can indicate new and old magnifications in a
    lookup table, with the intersection formula equal to the ratio of
    magnification plus one squared, as above.  For magnifications from 4X to
    12X, the table would be:
    
     Old                       New Magnification  
     Magn.
              4      5      6      7      8      9     10     11     12
    
       4    1.00   1.44   1.96   2.56   3.24   4.00   4.84   5.76   6.76
       5    0.69   1.00   1.36   1.78   2.25   2.78   3.36   4.00   4.69
       6    0.51   0.73   1.00   1.31   1.65   2.04   2.47   2.94   3.45
       7    0.39   0.56   0.77   1.00   1.27   1.56   1.89   2.25   2.64
       8    0.31   0.44   0.60   0.79   1.00   1.23   1.49   1.78   2.09
       9    0.25   0.36   0.49   0.64   0.81   1.00   1.21   1.44   1.69
      10    0.21   0.30   0.40   0.53   0.67   0.83   1.00   1.19   1.40
      11    0.17   0.25   0.34   0.44   0.56   0.69   0.84   1.00   1.17
      12    0.15   0.21   0.29   0.38   0.48   0.59   0.72   0.85   1.00

  7. #7

    Join Date
    Sep 2005
    Location
    Brooklyn, NY
    Posts
    87

    Post Re: Calculating new exposure for new print size

    Based on the Inverse Square Law as explained by NASA ..... http://quest.arc.nasa.gov/pioneer10/education/temp/

    I was able to develop an Excel sheet that calculates the new exposure time based on the amount of change in the elevation.

    Where NEW elevation is 30 and OLD elevation is 20 (with 12s exposure):

    ELEVATION (units can be anything)
    (new/(new-old))^2 X TIME = NEW TIME

    30 10 2.250 X 12s = 27s

    I use this when going from 8X10 to 11X14.

    These lines appear to clog to the left when previewed, I don't know how to handle that, sorry.

  8. #8

    Join Date
    Dec 2006
    Location
    Hamilton, Canada
    Posts
    1,881

    Re: Calculating new exposure for new print size

    I measure something on the first print that is 1 inch long. then measure that same thing at the new magnification.

    old time = new time
    -------- ---------
    1 squared new measurement squared

    or

    old time X new measurement squared = new time

    e.g. 4X5 to 8X10

    15 sec = new time
    ------- -------
    1 inch squared 2 inches squared

    15sec X4=60sec
    but different size papers are different speeds even for the same brand.
    and reciprosity ( or the fog of war ) always make minor testing necessary.
    Bill

  9. #9

    Join Date
    Dec 2006
    Location
    Hamilton, Canada
    Posts
    1,881

    Re: Calculating new exposure for new print size

    my spacing got killed

    old time divided by one squared equals new time divided by new measurment squared
    bill

  10. #10

    Re: Calculating new exposure for new print size

    An enlarger is nothing more than a macro camera that takes a "photo" of the negative or chrome in the carrier. The macro formulas for extension and effective aperture apply.

Similar Threads

  1. DOF question
    By Joe_1422 in forum Style & Technique
    Replies: 11
    Last Post: 23-Jan-2012, 16:43
  2. Compressed perspective on 4x5" - 800mm?
    By Patrik Roseen in forum Cameras & Camera Accessories
    Replies: 43
    Last Post: 26-Nov-2006, 06:27
  3. Too many Zones?
    By Pete Andrews in forum Style & Technique
    Replies: 28
    Last Post: 6-Sep-2004, 15:49
  4. Diffraction and Lens Flare
    By Paul Mongillo in forum Lenses & Lens Accessories
    Replies: 10
    Last Post: 12-Mar-2000, 13:57
  5. Calculating Exposure Compensation for Very Wide Lens & Tilt
    By Howard Slavitt in forum Style & Technique
    Replies: 4
    Last Post: 6-May-1999, 12:58

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •