Results 1 to 3 of 3

Thread: Crown Graphic - removing bellows

  1. #1

    Crown Graphic - removing bellows

    I need to replace the rear guide rails on my Crown Graphic. It looks like I may need to remove the bellows to have working room in the body to unscrew the old rails and replace. For the life of me I can't seem to determine how you remove the bellows. As always - thanks.

  2. #2

    Crown Graphic - removing bellows

    Anthony: Remove the lens board and extend the bellows. Look inside and see if there aren't some screws holding the bellows to the back. Some were mounted with a metal band if memory serves me correctly. The screws should be inside the last fold at the rear of the bellows, inside the bellows. Doug.

  3. #3

    Join Date
    Jan 2000
    Location
    Boulder, CO
    Posts
    86

    Crown Graphic - removing bellows

    On my crown, (a top rangefinder model) there are two clips, one top and one bottom, that hold the bellows to the back. Just pop these off with a small screwdriver, and the bellows will come out. As I remember, you have to fold the bellows inward at the sides a bit in order to remove it from the back.

Similar Threads

  1. Determining age of Crown Graphic
    By David Karp in forum Cameras & Camera Accessories
    Replies: 16
    Last Post: 26-May-2015, 12:41
  2. 2x3 Crown Graphic
    By Bill_1856 in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 28-Mar-2006, 19:14
  3. Why keep a 2x3 Crown Graphic?
    By gfen in forum Cameras & Camera Accessories
    Replies: 23
    Last Post: 3-Dec-2004, 06:42
  4. Removing bellows for refinishing
    By Matthew Lea in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 20-Aug-2004, 14:14
  5. Crown Graphic swing?
    By Ed Eubanks in forum Style & Technique
    Replies: 2
    Last Post: 9-Jan-2004, 08:36

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •