Results 1 to 6 of 6

Thread: Doctor lens/LensHoods/Groundglass Protector/Sratched lens

  1. #1

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    I am considering purchasing a 240mm f9 Doctor Germinar lens (I am told the optical quality is as good as the Rodenstock equivalent at half the cost)I would appreciate any comments from readers familiar with this optic.

    Are lenshoods a good idea to use with large-format lenses...I never seem to hear or see large format photographers using them!And if so,what are good brands to look out for?

    How practical are Groundglass Protectors;I carry my 5x4 in a billingham,would it still make good sense to invest in one or are they just a gadget for me to part with my money.

    I recently dropped my 210mm Schneider during a shoot.The front element has a dee p mark.I am told that because it is

    on the front element I should not worry,and because Schneider lenses are multi c oated.Is this true? I have used the lens in question since without any differenc e in image quality.

  2. #2
    Founder QT Luong's Avatar
    Join Date
    Aug 1997
    Location
    San Jose, CA
    Posts
    2,337

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    Lenshoods: in the lf world people tend to use compendium shades instead. they consist of a belows and offer more adjustment possibilities than the rigid hoods. calumet makes several models, but you have to find a way to attach them to your camera. if you are lucky the manufacturer of your camera has a fitted compendium shade.

    i find the ground glass protector useful. i throw my camera in a backpack. the only part to worry about is the ground glass.

  3. #3

    Join Date
    Dec 1997
    Location
    Baraboo, Wisconsin
    Posts
    7,697

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    The Lee filter company makes an adjustable, bellows-like lens shade that works w ell and is available from B&H for about $110. There are two versions, one of whi ch is designed to accept a single filter and the other of which is designed to a ccept multiple filters (primarily for color photographers). Obviously, you don't have to attach a filter and can use the shade strictly as a lens shade. It atta ches to the front of the lens by use of an adapter ring. You need one adapter ri ng for each different front lens size that you use (e.g. 67mm, 72mm, 77mm, etc.) or you can buy one adapter ring in the largest size lens that you own and then attach your other lenses by using step-up rings. This saves a little money becau se the adapter rings are about $30 each, whereas step-up rings usually run only about $5 each.

    I like using a ground glass protector. I don't think it's a gimmick. If the manu factuer of your camera doesn't make a protector designed for your camera, or if it costs too much money (e.g. Wisner makes a very attractive ground glass protec tor for Wisner cameras but it costs $60 or so) there are at least two sources fo r "generic" protectors. Calumet sells one for about $15. It does the job but it is made out of some sort of fairly hideous looking plastic. Canham makes a plexi glass protector that I find more attractive than the Calumet one and it sells fo r about $30. It is available from Del's Cameras in Santa Barbara, Cal. and perha ps other places as well.
    Brian Ellis
    Before you criticize someone, walk a mile in their shoes. That way when you do criticize them you'll be
    a mile away and you'll have their shoes.

  4. #4

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    In the real, real world, compendum lenshoods are not always practical. And besid es, they're expensive. I simply use the dark slide to 'gobo' the lens, i.e., sha de the lens from either direct sunlight or skylight. I made a groundglass protector for my 8x10 Deardorff after breaking the groundgl ass just before an important shoot. Find a plexiglass scrap and glue 4 pieces of Velcro to the corners. Then do the same to the camera back. I would also sugges t carrying a spare groundglass, just in case. In general, I find that I have to make a lot of stuff for large format. Don't gi ve the pricey gadget people your money if you don't have to. Sometimes spit and chewing gum is best.

  5. #5
    the Docter is in Arne Croell's Avatar
    Join Date
    Dec 1997
    Location
    Huntsville, AL
    Posts
    1,210

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    The Apo-Germinars are as good as the Apo-Ronars; I have tested the 300mm Apo-Ger minar and Apo-Ronar side by side, and the Apo-Germinar was at least as good. Her e in Germany, it was not half the price, though, about 20% less than the Rodenst ock. Try to get the newer version Apo-Germinar with a little brass spacer ring c alled the "trim ring". It is mounted between shutter and front cell. Without the ring, the lens correction is optimized for magnifications between 1:5 and 5:1, with the ring for all the other ones , e.g. for larger distances.

  6. #6

    Join Date
    Dec 1997
    Posts
    35

    Doctor lens/LensHoods/Groundglass Protector/Sratched lens

    On lens shades, I agree with Peter Hughes. Even though I own one for my Cambo 4X 5, I most often use pieces of black matte board attached with to the lensboard w ith sticky velcro. Bend the board outward from the velcro on the corner of a tab le before using the first time and size it as needed. The price is right and bot h hands are free! Just watch out for vignetting with wide angle lenses.

Similar Threads

  1. GG Protector?
    By John Kasaian in forum Gear
    Replies: 15
    Last Post: 16-Nov-2005, 08:02
  2. Cheap, easy GG protector
    By David R Munson in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 17-Feb-2005, 18:17
  3. Doctor/Chemist in the house?
    By chris jordan in forum Darkroom: Film, Processing & Printing
    Replies: 16
    Last Post: 2-May-2002, 00:35
  4. 8x10 GG protector?
    By John Hicks in forum Gear
    Replies: 18
    Last Post: 26-Jul-2001, 22:54
  5. Doctor-Optic 135mm lens with curved field?
    By Russell Fox in forum Darkroom: Equipment
    Replies: 8
    Last Post: 8-Nov-1999, 06:23

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •