Results 1 to 9 of 9

Thread: Using scanner to capture 8"x10" positive

  1. #1

    Join Date
    Feb 2006
    Posts
    10

    Using scanner to capture 8"x10" positive

    I want to get a film scanner to capture 8"x10" positive to PC. Could you give me some advices regarding:

    1. What is the file size (best quality) with a scanning resolution of 6400x9600 dpi?

    2. What is the quality of this file? I mean if I send this file to photo printing lab to print a 16"x20" photo. What is the quality of this photo? Of course, you may ask why not send the film directly for a print.

    3. Which scanner do you suggest? Epson? Nikkon? Drum scanner?

    4. How much should I pay for a good quality scanner?

    Thanks a lot.

  2. #2

    Join Date
    Jan 2006
    Location
    Toronto
    Posts
    126

    Using scanner to capture 8"x10" positive

    When you say 'positive' do you mean a print or transparency?

    from 8x10 to 16x20 is only a 2x enlargement, so you only need a scanner capable of about 600-1000 dpi

    Any flatbed scanner capable of scanning your 8x10 original should be fine.

  3. #3

    Join Date
    Mar 2005
    Location
    Baton Rouge, LA
    Posts
    2,428

    Using scanner to capture 8"x10" positive

    If all you want is a 16x20 from 8x10, you could use almost any scanner with a transparency adapter that covers 8x10 because you only need about 1200 DPI in the scan to more than max out any 16x20 printing media. Your big issue would be avoiding Newton's rings, not resolution. Dmax could be an issue, but again, you have so much resolution to spare you could filter out the noise and still be fine.

    Your real question should be how big a print do I want to make from these scans? If it is less than about 40x60, you are not going to tax the scanner.

  4. #4

    Join Date
    Feb 2005
    Posts
    2,955

    Using scanner to capture 8"x10" positive

    Hello Davie, the 9600 dpi you state is probably an interpolated figure, and is overkill in any case. You need about 300 ppi for most printing. At 4800 dpi from an 8x10 you could print128" x160". But in an case the file would be too large for Photoshop to handle.

    What is your budget, an what is the largest that you plan to print in the future? A 16x20 is only a 2x enlargement from the chrome. You could do that with an Epson 4990 easily.

  5. #5

    Join Date
    Jun 2002
    Posts
    9,487

    Using scanner to capture 8"x10" positive

    Since your questions reveals that you're not experienced at this, I suggest starting with an inexpensive Epson that will scan 8x10, like the 4990 or one of the newer models that have just been announced but are not yet shipping (the Epson 750 series).

    Even if you do have the deep pockets to do drum scans and ultra large prints, you will still need the cheap Epson for proofing and tests. You're not going to want to scan and print everything large, and even if you did, it would behoove you to do a quick and dirty test with the Epson to confirm that your film is good and sharp before investing the time and money into a drum scan. You will also need to make rough proofs for others to go by, make small scans for the internet, etc.

  6. #6
    Ted Harris's Avatar
    Join Date
    Aug 2000
    Location
    New Hampshire
    Posts
    3,465

    Using scanner to capture 8"x10" positive

    A few more thoughts. There are several models available in the 500 or less range from Micreotek and Epson and any of them will do what Frank says. This is a good starting point. The next step up is the Microtek 1800f which will cost you around 1000 and the next step up after that will run you into many many thousands for 8x10 capability.

    You really do need to answer a number of questions for yourself before you proceed .... all along the lines already posed. Additionally, you will want to evaluate the material you are scanning to see how much shadow deteail you are dealing with as that is where you have the real issues with the scanners we are discussing v. the drum scanners.

    I don't know where you are located but if it is anywhere in North America you might want to consider one of our Scanning Workshops where you will get a chance to try out a number of different scanners. I will send you some details offlist.

  7. #7
    Ted Harris's Avatar
    Join Date
    Aug 2000
    Location
    New Hampshire
    Posts
    3,465

    Using scanner to capture 8"x10" positive

    dvie ... tried to send you an emailand it bounced back

  8. #8

    Join Date
    Dec 1999
    Location
    Forest Grove, Ore.
    Posts
    4,675

    Using scanner to capture 8"x10" positive

    I scanned an 8x10 positive, vintage print, worked on it in Photoshop, and got excellent inkjet results reproducing it to 1:1. I haven't tried it, but I would feel comfortable going to 11x14. I dunno about 16x20, but knowing that excellent results are possible at 1:1, I'd give it a try.

    I used a 4870 scanner, and the image was scanned at 900 ppi. This was probably overkill, but I wanted to allow for the possibility of enlargement later on.

    When one considers the stringent demands placed on scanners by film, given enlargement and dynamic range factors needed, the same scanner can do an excellent job with reflective media.

  9. #9

    Join Date
    Mar 2005
    Location
    Baton Rouge, LA
    Posts
    2,428

    Using scanner to capture 8"x10" positive

    By positive I thought you meant a transparency - do you mean a print? If it is a print, nearly any scanner will work.

Similar Threads

  1. Digital Capture & Standard LF Lenses
    By neil poulsen in forum Digital Hardware
    Replies: 24
    Last Post: 4-Feb-2005, 14:47
  2. Direct Positive Processing
    By Robert A. Zeichner in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 2-Jul-2004, 17:48
  3. B/W Positive Without The Proof?
    By Mike Howard in forum On Photography
    Replies: 4
    Last Post: 7-Sep-2001, 22:24
  4. Negative or Positive ..which is better ?
    By James Phillips in forum Darkroom: Film, Processing & Printing
    Replies: 13
    Last Post: 28-Aug-2000, 22:24
  5. 4x5 field stability of digital capture?
    By Ted Daughety in forum Digital Hardware
    Replies: 5
    Last Post: 18-Dec-1998, 18:08

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •