Page 1 of 3 123 LastLast
Results 1 to 10 of 28

Thread: New articles by Jeff Conrad on DoF

  1. #1
    Founder QT Luong's Avatar
    Join Date
    Aug 1997
    Location
    San Jose, CA
    Posts
    2,337

    New articles by Jeff Conrad on DoF

    Jeff Conrad has split his exposition of DoF into two new articles
    Intoduction to DoF,
    which is now a true "introduction", and
    DoF in Depth, which
    will likely be a definitive reference on the subject, revisiting also the "optimal f-stop" approach.

    Please feel free to leave any contructive comments on the new articles in this thread.

    For reference, comments on the old article are available
    here.

  2. #2

    New articles by Jeff Conrad on DoF

    Equation 3 (long form) in the intro (top of page 4) - should N (LHS) be the f-number, not the focal length?

    Otherwise a very nice article.

    ..d

  3. #3

    Join Date
    Apr 2004
    Location
    SF Bay Area, California, USA
    Posts
    331

    New articles by Jeff Conrad on DoF

    That would make more sense, wouldn't it?

  4. #4
    Eric Woodbury
    Join Date
    Dec 2003
    Posts
    1,637

    New articles by Jeff Conrad on DoF

    No doubt definitive, but are the Hansma numbers I'm using non-optimal? I'll never know. Hansma's article was simple and practical.

    It would be interesting to see actual photographs demonstrating the effects that are characterized by all those equations.

    Also, as a BW photographer, I'm not sure I agree with the assumption of using 546nm as the spectral middle. Unless using filters, I should think a shorter wavelength would be better. It would be nice to have an Excel spreadsheet version of this that allowed calculations of the optimum f/number given our personal settings such that we might develop a better feel for DOF.
    my picture blog
    ejwoodbury.blogspot.com

  5. #5

    Join Date
    Mar 2002
    Location
    Sweet, ID
    Posts
    523

    New articles by Jeff Conrad on DoF

    Hansma's numbers are not non-optimal. The issue is what is optimal, which is subject to the optimization contraints. Hansma uses diffraction and defocus as contraints. Others have used MTF response. The real test of optimallity is in your own photographs. If you like them, join a f/64 group. If you don't, say your a member of a Pictorialist Club.
    The only trouble with doin' nothing is you can't tell when you get caught up

  6. #6

    Join Date
    Apr 2004
    Location
    SF Bay Area, California, USA
    Posts
    331

    New articles by Jeff Conrad on DoF

    Hansma's numbers and mine differ by about 3%; for practical purposes, they
    are the same, and I tried to suggest this in both articles. Stated
    otherwise, Hansma's numbers appear to work quite well indeed, more so than
    the alternative suggested by Wheeler; quite honestly, this was a bit of a
    surprise to me.

    Both Hansma's numbers and mine are empirically derived: in his case, using
    a “rule of thumb” method for combining defocus and diffraction;
    in my case, from observing MTF graphs and noting the optimum f-numbers at
    an arbitrarily chosen spatial frequency. That three slightly different
    approaches seem to give about the same numbers suggests that the numbers
    are not unreasonable.

    My choice of spatial frequency (6 lp/mm in the final image) is somewhat
    arbitrary; it could be argued that this frequency is below the threshold of
    detectability (although I'm sure that some others might argue that 15 lp/mm
    would be more suitable). If I had chosen 4 lp/mm, the optimum f-number
    would be slightly less in most cases. I chose 6 lp/mm largely because the
    best-fit equation used the square root rather than an exponent such as
    0.62, which requires more effort (and introduces more chances for error).

    I agree that 546 nm is arbitrary; I chose it simply because most other
    analyses have used similar values. Offhand, I'm not sure I could assemble
    a spreadsheet, because I'd need to recompute the MTFs and see what
    happened. I may try this (it's not difficult), and if I see anything
    significant I'll mention it.

    In practical photography, I see little need for more than three equations:
    <ol>
    <li>Focus distance</li>
    <li>Minimum f-number based on DoF</li>
    <li>Maximum f-number based on diffraction effects</li>
    </ol>

    The other equations and graphs are included simply to indicate that I
    didn't pull the numbers out of the air. You may disagree with my methods
    and results, but at least you can see how I obtained them.

    Perhaps most important: reaching the DoF limit is not like falling off a
    cliff. DoF simply isn't an area where 5 significant figures are
    meaningful. No real-world images will match the numbers I obtained. I
    made a number of simplifying assumptions; in particular, I treat lenses as
    aberration free and do not include the effects of the imaging medium.
    Without these simplifications, however, the problem becomes so complex as
    to be unmanageable.

    I certainly agree that analysis of some actual images would be helpful
    (Hansma did perform some tests that matched his predictions quite well).
    I'd also like to see some tests that affirmed or negated the common
    assumptions of detectable blur, as well as a rigorous test of the benefits
    of equal vs. unequal near- and far-limit CoCs under reasonable viewing
    conditions (I don't usually examine a print with a microscope). I'm not
    convinced that I see much benefit, though my tests are far from rigorous.
    Doing a meaningful, quantitative test is no simple matter, and I'm not
    currently set up to perform tests with which I would be satisfied.

    For what it's worth, I personally set focus and f-number from the image
    side, using the approximate equations. I never worry about diffraction,
    because motion blur nearly always is a far greater problem. In other
    words, I pretty much forget the math when actually using a camera.
    Hansma's article, as well as the results I got from the MTF analyses, seem
    to suggest that what many of us have done for years is just fine.

  7. #7

    Depth of Field in Depth: Relative blur with pupil dilation issue?

    Hello, I've been reading Depth of Field in Depth, and it has been of great help for my purposes.

    However, I may have stumbled upon an issue, unless I'm wrong. Equation 96, "relative blur" with pupil magnification, is derived from equations 44 and 95. Doesn't equation 44 assume no pupil magnification?

    With pupil magnification, according to Physics of Digital Photography, entrance pupil position is:

    u_ep = f * (1 - 1/p).

    This means that the magnification at defocused point should not be:

    (m + 1) * f / u_d,

    but:

    (m + 1) * f / (u_d - u_ep).

    If my algebra is correct, this means that equation 96 would get slightly modified, by replacing the p * u_d part in the numerator with (p * u_d + f * (1 - p)). In the end, this seems to simplify so that the effect of p completely disappears:

    m/(m+1) * |u_d-u|/N,

    which is identical to the equation 45: relative blur without pupil dilation.

  8. #8

    Re: Depth of Field in Depth: Relative blur with pupil dilation issue?

    It appears I made a mistake so my results in previous post are wrong:

    m_d = (m/p + 1) * f / (u_d - u_ep)

    u_ep = f * (1 - 1/p)

    With this, the result becomes:

    k_r = k/m_d = m*p/(m+p) * |u_d - u| / N

    I get the exact same result by sketching things on paper, using similar triangles and then substituting u = f/m+f and u_ep = f*(1-1/p). In any case, the DoFiD paper seems to be wrong for equation 96.

    Click image for larger version. 

Name:	relative blur triangles.jpg 
Views:	21 
Size:	19.0 KB 
ID:	180588

  9. #9
    Thalmees's Avatar
    Join Date
    Jun 2006
    Posts
    342

    Re: Depth of Field in Depth: Relative blur with pupil dilation issue?

    Welcome to the forum relatively-random,
    Wish you all the success.
    Digital image is not Optical image, can not be controlled by optics physics once hit the sensor.
    Projected optical image is going through multiple filters in front of sensor, including AntiAlising filter.
    Then, charge(image electric effect on sensor) is going to A/D converter.
    Each camera will display its own photo, depends on the camera Photoshop(processor).
    On monitor or at printing, all digital photos(if not most) need UnSharpMask(to compensate for AA filter), plus other digital filters like blur filter.
    All of these conversions and compulsory manipulations, will not let digital image to act appropriately within optics laws.
    Thanks so much for your topic.

    The generosity of spirit in this forum is great, its warmly appreciated.
    ------------------------------

  10. #10
    ic-racer's Avatar
    Join Date
    Feb 2007
    Posts
    6,736

    Re: Depth of Field in Depth: Relative blur with pupil dilation issue?

    You might try email: jeff_conrad@msn.com

Similar Threads

  1. New utility by Jeff Conrad: Sun/Moon calculator
    By QT Luong in forum New Products and Services
    Replies: 51
    Last Post: 22-Jul-2015, 01:09
  2. New article by Jeff Conrad: Introduction to DOF
    By QT Luong in forum Feedback
    Replies: 10
    Last Post: 7-Mar-2005, 23:37
  3. New articles on Mamut Photo
    By Jan Van Hove in forum Announcements
    Replies: 1
    Last Post: 24-Jan-2005, 09:48
  4. Two articles from Way beyond monochrome
    By QT Luong in forum Announcements
    Replies: 0
    Last Post: 11-Dec-2003, 00:12
  5. Replies: 11
    Last Post: 17-Nov-2003, 11:46

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •