Results 1 to 10 of 10

Thread: 10 x 12 dunking tanks

  1. #1

    10 x 12 dunking tanks

    hello-

    wondering if anyone has a resource they could share for large dunking tanks- i'm setting up for wet plate collodion, have a 10 x 12... help.

    appreciated,

    jennifer

  2. #2

    10 x 12 dunking tanks

    Most make their own Silver Baths out of acrylic sheet; its not hard to do, but does require tools. Many acrylic shops will cut or even build to order, however I do recall seeing dip tanks for some other purpose which would probably work, but my mind is going blank now. Regular photo dip-dunk tanks are way to big; they would cost a fortune to fill (my 11x14 baths which are pretty small take about $150 worth of Silver Nitrate), and tanks work best at about a 30 degree incline.

    If you want to buy them, both Wayne Pierce and Ray Morgenweck make them.

    Try asking at:

    www.cwreenactors.com/phorum/index.php

    or

    www.collodion.com/forum/default.asp

  3. #3

    Join Date
    Dec 2001
    Location
    San Joaquin Valley, California
    Posts
    9,599

    10 x 12 dunking tanks

    How about appropriately sized aquariums? Also, battery boxes might be a possiblity---the big plastic ones that are made for diesel engine batteries? Of course you'd still need hangers unless you make a "slot" processor and used those clippy things.

    Have you considered using a Unicolor processor? The 11x14 drum could probably be made to hold your film if you cement a bit on an extesnsion to the "v" to keep the film in situ during the spin cycle. That could be the most cost effective way to go. With as 16x20 drum you might even get 4 up with some mods.
    "I would feel more optimistic about a bright future for man if he spent less time proving that he can outwit Nature and more time tasting her sweetness and respecting her seniority"---EB White

  4. #4
    Scott Davis
    Join Date
    May 2002
    Location
    Washington DC
    Posts
    1,875

    10 x 12 dunking tanks

    John K -

    doing the unicolor or any other kind of drum won't work. Wet-plate collodion is done on glass plates. She's looking for a solution that will let him sensitize his glass plates in the silver nitrate bath.

    Jennifer - I'd second the build-your-own solution. I made my own 11x14 dip-n-dunk tank for processing prints using cut sheets of acrylic, which I had custom cut at a plastics specialty shop. It cost me about $100 to do, and that was for a 3-slot tank, with a 1/2" thick base plate. What you're looking to do should be less expensive than that. It also takes relatively little time other than running around to the plastics supply place. You need to get a really good epoxy resin glue to assemble the thing, which the plastics supply place will sell you, and a decent syringe with some kind of stainless steel needle to apply the stuff. The epoxy resin glue takes just minutes to harden, and once it is done, it is truly waterproof as it melts the plexi at the point where the resin is applied and literally fuses the two sheets together. The bond formed will actually be stronger than the plexi itself - I found this out when I tried to dismantle my dip-n-dunk box.

  5. #5

    Join Date
    Sep 2003
    Location
    Kalamazoo
    Posts
    648

    10 x 12 dunking tanks

    Hi Jennifer,

    I just built two plexi tanks to do 10x12 wetplate. The silver tank is ~ 5/32" thick red acrylic and has a lid so that it can be closed and lights turned on once the plate is in the sensitizing tank. I built the fixer tank with clear acrylic except for the back and the dipper which are black so that I can observe the ambrotype reversal as it happens. (I'll upload a pic once home.) The tanks hold about 2200ml solution with dipper and plate displacing the fluid.

    The material costs were minimal. I think the plastic fixer tank costs $11 in materials and the red one wasn't much more. I just asked at the local plastics supplier if they had any cutoff scrap sheets laying around and they were happy to get rid of them. I cut them down on a table saw. I also bought some "Weld-On 3" and "Weld-On 16" which are the acrylic cements others have referred to. The latter is thickened with plastic and slower working while the former is liquid, fast-acting, and is applied with a syringe.

    With the leftover material from the sheets I built several "helper trays" and dippers and have enough material for some red plexi windows for the portable darkroom tent I'm revising as well as inserts for wetplate holders. You can save a lot of money doing it yourself.

    I can post dimensions and sketches for the tanks if you'd like to give it a go yourself.

  6. #6

    Join Date
    Sep 2003
    Location
    Kalamazoo
    Posts
    648

    10 x 12 dunking tanks

    Here's the lidded red acrylic tank with the dipper inside:

    http://my.net-link.net/~jsmigiel/images/technical/collodion/red_tank.jpg

    I like this design as it eliminates the bulk of putting a wooden lightproof box around the sensitizing tank and thus makes for a lighter load in the field.

  7. #7

    Join Date
    Sep 2003
    Location
    Kalamazoo
    Posts
    648

    10 x 12 dunking tanks

    Hmmm. Let's try that upload thing again:


  8. #8

    10 x 12 dunking tanks

    wow, this is great, and thank you. the red is very pretty- great idea.

  9. #9

    10 x 12 dunking tanks

    and yeah- joe, dimensions would be most useful. i'll give it a whirl.

    thanks again,

    jen

  10. #10

    Join Date
    Sep 2003
    Location
    Kalamazoo
    Posts
    648

    10 x 12 dunking tanks

    Jen,

    Here ya go:



    Good luck with the project.

Similar Threads

  1. combi plan tanks
    By colin smith in forum Darkroom: Film, Processing & Printing
    Replies: 12
    Last Post: 22-Aug-2013, 00:08
  2. Cleaning developing tanks
    By Matt Mengel in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 3-Apr-2005, 09:57
  3. Jobo tanks
    By Delfino L. Tiongco in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 26-Oct-2001, 16:03
  4. Daylight tanks for cut film
    By Andy Firth in forum Darkroom: Film, Processing & Printing
    Replies: 8
    Last Post: 31-Aug-2001, 13:32
  5. Tanks for 4x5 film proccessing
    By Raven Garrow in forum Darkroom: Film, Processing & Printing
    Replies: 9
    Last Post: 15-Aug-2000, 19:31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •