Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: apo symmar as macro

  1. #1

    apo symmar as macro

    does anyone know if it is possible to reverse a normal lf lens (such as an apo symmar) to use at higher mag. ratios as one can do with a 35mm lens? i was thinking of doing this with my 210/5.6 apo symmar instead of buying/renting a special macro or process lens. if poss. how could this be done? would it be better to use a longer or shorter lens?

  2. #2

    Join Date
    Mar 1999
    Posts
    769

    apo symmar as macro

    Not a direct answer to your question. I have used my enlarger lens and it gave me much nicer results than using my normal picture taking lenses reversed (magnification ration was about 3X). Normal taking lenses reversed do give better results than just extending them the heck out in the normal way. Lenses are typically designed for the front element to face the larger of the conjugate distances and so at 1:1 and beyond, it probably is a good idea to reverse the lens. It may not always be possible to do so since you might lose your shutter which ends up inside your camera body. Depending on your lensboard design, you may have to actually remove the lens from the lensboard and remount it backwards. Given all these complications, I'm biased towards the enlarger lens - if it is the standard 39mm mount, it should fit into a lensboard designed for a Copal #1. Its small and light (smaller focal lengths should work fine since you're using them at some magnification which should give you a good image circle to work with - in fact, I'm biased towards slightly shorter focal lengths since that way you can avoid having a huge image circle with stray light bouncing around all over the place). Given bellows extension and longer times, the lenscap works fine for timing (if you would really prefer more control, Packards are an option). DJ

  3. #3

    apo symmar as macro

    I agree. Use a process lens, like an enlarging lens or a G-claron. These lenses are cheap used. They are small and can be used for general photography. I know you already have an Apo Symmar, but I would prefer a 210 G-Claron. I don't think the focal length of the lens matters in terms of macro-correction.

  4. #4

    Join Date
    Dec 1999
    Location
    Forest Grove, Ore.
    Posts
    4,675

    apo symmar as macro

    I used a 150mm Componon-S mounted in a Copal 0 (Schneider's recommendation) and got excellent results at about 1:5 (imagebject). At the same time, if you don't have an enlarging lens/shutter combination that works, you can try some tests. Wisner comments in his Q&A section that the apo-symmars have improved performance (over the Symmar-S), even up to 1:1.

  5. #5

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    apo symmar as macro

    An enlarging lens should also be reversed mounted for macro work and Rodenstock supplies a 40.5 to 39mm reverse ring for theis purpose.

    Even more importantly and frequently overlooked is the illuminated aperature on most quality enlarging lenses.

    You must block the port or you are letting color filtered light to reach the film through the illuminated aperture scale.

  6. #6

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    apo symmar as macro

    " Wisner comments in his Q&A section that the apo-symmars have improved performance (over the Symmar-S), even up to 1:1."

    But that in no way infers that it is as good as a macro fo 1:5 to 5:1 or even at 1:1.

    Simply stated all current versions are better then old versions and none that are general purpose 5.6 lenses designed for 1:10 or 1:20 will work well at 1:5 to 5:1.

  7. #7

    Join Date
    Dec 1999
    Location
    Forest Grove, Ore.
    Posts
    4,675

    apo symmar as macro

    To Bob's Salomon's comment . . .

    Clearly, we would not expect a lens designed for normal use to work as well as a macro. But, I don't believe Ron Wisner would have specified " . . , even up to 1:1" if he didn't think the lens could provide at least passable performance.

    The suggestion was to check out the possibility, versus having to purchase or rent additional equipment. In a recent posting, you implied that what's important is whether or not what is available meets the need at hand. I think that same sentiment applies here.

  8. #8

    apo symmar as macro

    thanks for the response. it seems the apo symmar might be acceptable for my purposes (not quite up to 1:1). which brings up another question. how well does the g claron 240 work as a general lens? is it uncoated? it is much smaller and cheaper than the symmar and i don't want two 210s. extension is not a problem. basically i'd like a lens to pull double duty. any comments or experience is appreciated.

  9. #9

    Join Date
    Dec 1997
    Location
    Baraboo, Wisconsin
    Posts
    7,697

    apo symmar as macro

    I have a 150 mm G Claron that on a subjective basis seems to work very well at magnifications other than 1:1. I assume the 240 would work equally well. I haven't done any scientific tests however. The 150 is small, light, and relatively inexpensive. It's only downside for me is an odd filter diameter (35.5mm) but I was able to find a 35.5 to 52 adapter ring made by Heliopan.
    Brian Ellis
    Before you criticize someone, walk a mile in their shoes. That way when you do criticize them you'll be
    a mile away and you'll have their shoes.

  10. #10

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    apo symmar as macro

    "Clearly, we would not expect a lens designed for normal use to work as well as a macro. But, I don't believe Ron Wisner would have specified " . . , even up to 1:1" if he didn't think the lens could provide at least passable performance. "

    Try it and then compare it to a macro.

    A lens designed for 1:10 or 1:20 can not do acceptable professional standard work at 1:1.

    If your definition of passable includes less than sharp then Ron is correct.

    My definition would exclude an optic that compromisis performance optically. Apparently Ron isn't as critical when overall performance is concerned.

    Having been dealing with illustrative photographers doing 1:1 and near 1:1 catalog photography of 3 dimensional objects over the past 15 years I can think of none who have actually do professional quality work the way Ron suggests. Whenever they have they have tried the results simply are not critically sharp enough for catalog or advertising. Yes if you are going to do an occassioanl close up of a rock it may be passable. but not if you want to show detail over the entire ar

Similar Threads

  1. Macro lenses for non-macro work
    By Mike Lopez in forum Lenses & Lens Accessories
    Replies: 4
    Last Post: 23-Aug-2004, 16:30
  2. Nikkor AM 120mm/5.6 ED Macro/Rodenstock 120 macro
    By Don Boyd in forum Lenses & Lens Accessories
    Replies: 12
    Last Post: 6-Oct-2003, 17:51
  3. Q: Best non-macro lens for macro work?
    By Todd Caudle in forum Style & Technique
    Replies: 4
    Last Post: 14-May-2001, 08:16
  4. Macro Sinaron 180 vs Apo Macro Sironar 180
    By Norhisham Abu in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 18-Feb-2001, 22:15
  5. Differences between Schneider Symmar-S and Apo Symmar
    By Stefano Gatti in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 9-Feb-2000, 11:16

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •