Results 1 to 5 of 5

Thread: How to use light meter of 35mm camera to determine exposure for LF camera

  1. #1

    How to use light meter of 35mm camera to determine exposure for LF camera

    Hello, Thank you for a great site. You mentioned in the section on light meters that you use the meter on your Niko n camera. How does this work? Must you convert the exposure indicated by the Nik on to the corresponding exposure for the LF camera? How can you use the light me ter of one of your 35mm cameras to determine the exposure required for the LF ca mera? I don't understand.

    Best regards,

    Matt Held

  2. #2

    How to use light meter of 35mm camera to determine exposure for LF camera

    Set the ASA on your Nikon to the ASA of the film you are using in your LF camera. Set the aperture on your Nikon to the same aperture you are using on your LF camera (if your Nikon lens doesn't have small enough apertures, you'll have to do some mental calculations). Meter with the Nikon and calculate shutter speed as you normally would. Set the shutter speed on your LF accordingly.

  3. #3

    Join Date
    Nov 1999
    Location
    Tacoma,WA
    Posts
    127

    How to use light meter of 35mm camera to determine exposure for LF camera

    use it as you would a handheld light meter. just remember to scale the reading, adjusting for Bellows Extension Factor, reciprocity, and interpretation. it isn't as easy as 35mm, but it sure is more rewarding!

  4. #4

    Join Date
    Mar 1998
    Posts
    1,972

    How to use light meter of 35mm camera to determine exposure for LF camera

    You are using the Nikon the same way you would a handheld spot meter. The way yo u do it is to choose a lens for your 35mm camera that covers roughly the same area as the lens for your 4x5. Roughly speaking, that means a lens of rough ly 1/3rd the focal length of your 4x5 lens. bellows factor really doesn't start coming into play until you are at about 1/4 life size. If your camera has a spot meter feature, you can use the camera as a very precise spot meter, especially if the 35 mm camera is fitted with a 100 mm or longer telephoto.

  5. #5

    How to use light meter of 35mm camera to determine exposure for LF camera

    If your camera's meter dosen't have a good spot option (1 degree) get a gray card (B&H carries them, around $5.00, with instructions)and turn your camera's reflective meter into an ambient meter and proceed as indicated above. This will give more consistently good exposures, which is important in LF given its limitation of how much you can shoot compared to 35mm.

Similar Threads

  1. Direct camera exposure on Ilfochrome
    By Philip Caithness in forum Darkroom: Film, Processing & Printing
    Replies: 31
    Last Post: 11-Jul-2013, 06:40
  2. Digital compact camera as light meter - experiences?
    By Joffre Swait in forum Style & Technique
    Replies: 9
    Last Post: 16-Dec-2003, 23:21
  3. 35mm SLR as an exposure meter
    By David Szwec in forum Style & Technique
    Replies: 11
    Last Post: 30-May-2002, 20:35
  4. 4x5 Pinhole Camera Exposure
    By c skiscim in forum Cameras & Camera Accessories
    Replies: 7
    Last Post: 25-Jan-2002, 09:48
  5. Determine exposure using polarizer
    By Terry Lorch in forum Style & Technique
    Replies: 2
    Last Post: 21-Apr-1998, 19:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •