Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Ansco view cameras-- any good?

  1. #1

    Ansco view cameras-- any good?

    I know that weston used one and they seem to be available relatively cheap. How good are the later model ansco 8x10 cameras? How do they compare with other cameras in this price range such as the B&J? Are they heavy?

  2. #2
    MIke Sherck's Avatar
    Join Date
    Mar 2002
    Location
    Elkhart, IN
    Posts
    1,277

    Ansco view cameras-- any good?

    The Ansco was considered to be a step above the B&J in it's day -- more of a "professional" camera. Well built and with lots of movements but quite heavy and rather bulky even when folded. Note that there were several models, some having fewer movements than others. There is also a sliding tripod block which attaches to the bottom of the camera's bed so you can slide the camera back and forth on top of the tripod for balance. Try to get one with the sliding block: the camera is heavy enough that it's really quite useful to balance the camera for stability. Also note that there is an additional bed which can be attached to increase the camera's extension. Both the sliding tripod block and the bed extensions can be a little difficult to find separately, so if you can find a camera with both it will be worth a bit more. Also, be wary of stripped focusing gears.
    Politically, aerodynamically, and fashionably incorrect.

  3. #3

    Ansco view cameras-- any good?

    I just purchased an Ansco 8x10 off Ebay for $525 delivered to my door. After purchasing and using a Canham 8x10 I swore I would never go near the format again. But I really like this camera. The extra weight is of no concern. Mine extends to 35 inches. Just waiting for Richard Ritter to finish my lensboards and I'll be up and running. I expect some great photographs with my new/pld machine. They are not all that available out there. This is one of only several I have seen on EBAY or anywhere else for that matter in several years. Good luck in your decision.
    Best, Peter Schrager

  4. #4

    Join Date
    Nov 2001
    Location
    IL
    Posts
    720

    Ansco view cameras-- any good?

    I have and use an Ansco 8x10. It weighs about 12 lbs. body only. I have a small plastic cart that I use to take it (and the associated gear) any distance from my car. I think my bellows only has a draw of 29 inches. I bought mine from Jim @ Midwest Photo Exchange a couple of years ago at $495. I've never heard of the sliding block mentioned above, but it sounds interesting. I use a long lens support clamped to the tripod to support the rear bed of the camera. It made a difference between sharp pictures and slightly fuzzy pictures.

  5. #5

    Join Date
    Feb 2001
    Location
    Los Angeles
    Posts
    2,206

    Ansco view cameras-- any good?

    Except for the weight and the typical thick folded tailboard design, the ANSCO is a nice 8X10. Lots of belows, clever built in extra extension rail (versus the B&J one you have to carry around separately) lots of movements. The later ones are painted. Mine didn't have front swing but was easily modified to add it. Front axis tilt and a clever front knob which slides to lock the front rise and fall. Compared to a B&J there is no comparison. It is just better made and much less likely to suffer from the bed slouch which afflicts the B&J's. Used, I think they are a bargain.

  6. #6

    Join Date
    Dec 2001
    Location
    San Joaquin Valley, California
    Posts
    8,247

    Ansco view cameras-- any good?

    FWIW I've seen different models of Anscos or Agfa Anscos on eBay. I don't know if they are special models or if they were cobbled up from parts, but they are lacking in bellows length compared to the more common Universal and Studio type models. With that exception, I think they are fine cameras. I've got a tiny fleet of the 5x7 Universals that I'm very impressed with. The cherry finished ones with brass knobs are IMHO very good looking but the gray painted plastic knobbed ones do the same things---your film won't know the difference!

    I'd give the Ansco high marks all around. Not as light or compact as the Deardorff or Century Universal but for the prices they go for the GPD (Grins Per Dollar) index says it all. Ansel even used one!

    Cheers!
    I steal time at 1/125th of a second, so I don't consider my photography to be Fine Art as much as it is petty larceny.
    I'm not OCD. I'm CDO which is alphabetically correct.

  7. #7

    Join Date
    Oct 2003
    Location
    Richmond Virginia
    Posts
    139

    Ansco view cameras-- any good?

    Hello. I have an 8x10, with 8x10, 5x7, & 4x5 backs; and a 5x7 with 5x7 & 4x5 backs. Both are the more recent grey-painted models with plastic knobs. They don't have long bellows, as mentioned above, but I like them both. I primarily use the 8x10. Prior to the Ansco, I had an Eastman 2D 8x10, which I liked, but the Ansco has more movements. I paid $300 for the 8x10 outfit which included the camera, case, 3 backs, 3 8x10 film holders, an 8 1/4" Dagor, and original Ansco tripod. I paid $200 for the 5x7 outfit, which included the two backs, case, and Ilex lens. Both cameras came with good bellows.

    I like the cameras. From what I've seen, I would rate them a very good second choice to the Deardorff in the older LF wood field camera market, and substantially less expensive.

    A tip for the 8x10. I removed the head/mounting block from the Ansco tripod, attached a quick release mount to the bottom, and use it to mount my 8x10 to my Bogen 3-way tripod head. The camera has two points of tripod attachment to the Ansco head/mounting block, and using both of them makes the camera more stable on the tripod.

    Truth be told, I was happy with the Eastman 2D, but it needed new bellows, and the Ansco outfit was a very good deal.

  8. #8

    Ansco view cameras-- any good?

    Thanks.
    I should of clarified 'heavy', i sweated under a C-1 for a year or two and want to get back into large format. I guess my thinking is that the ansco would be a poor mans deardorff. I lust for a wehman but can't afford one.

  9. #9

    Ansco view cameras-- any good?

    My Ansco had the sliding block for the bottom but it also came with a 4x10 slide that fits in a slot in the rear of the camera. If your interested in experimenting with 4x10 you might want to try finding one of the 4x10 slides/dividers.

  10. #10

    Join Date
    Sep 2006
    Posts
    36

    Re: Ansco view cameras-- any good?

    I realize that this thread is old but I still want to put my 2-cents worth in for the benefit of anyone searching for info on this topic. I have an 8x10" Ansco/Agfa camera and i like it very much. Mine was totally restored by a well-known camera restorer before I purchased it. From my research, it appears to be a later version of the camera because it it has the brass tracks that keep the front standards in line rather than the brass support piece that was mounted between the tops of the front standards. It has a full range of movements and also the built-in extension rail and the sliding block to center it on a tripod. I am told that it can be difficult to find one of these cameras with that block but it is very useful. Mine is is dark-stained cherry wood and it has brass hardware. I have often wondered why the later models that were painted gray and had plastic knobs were considered to be the top-of-the-line because my camera is quite beautiful. It has a full range of movements and lots of bellows draw (I can't remember how much off-hand.) I was told by the guy who restored it that he modified it to have a front movement that it didn't orignally have but I can't see any signs of the mofification. It has front swing, tilt, shift, rise, fall, and rear swing, tilt, and shift. It is heavy but that's not a problem for me. I suppose I would prefer a clamshell design such as a Deardorff but this camera serves my needs very well. It's a pleasure to use and I highly recommend it to anyone who doesn't mind a heavy camera. In 4x5", my primary field camera is a Wisner Technical Field which is very much like a Deardorff. In any case, I think Ansco/Agfa cameras can be a great value and I'm very happy with mine. I like using classic equipment and this camera certainly fits that bill. It gets the job done and it's a pleasure to work with.

Similar Threads

  1. Seneca no. 8 (And other good "first cameras"?)
    By Eric_6578 in forum Cameras & Camera Accessories
    Replies: 17
    Last Post: 7-May-2006, 20:11
  2. Omega view cameras???
    By Rick Dawson in forum Cameras & Camera Accessories
    Replies: 6
    Last Post: 1-Jul-2002, 02:29
  3. Any Ansco 5x7 view camera users?
    By Dwight Gaiens in forum Cameras & Camera Accessories
    Replies: 5
    Last Post: 25-Jan-2000, 23:47
  4. Lotus View cameras
    By Mark Alan Wilson in forum Cameras & Camera Accessories
    Replies: 1
    Last Post: 1-May-1998, 00:25

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •