Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: A Lightweight 14x17 Build

  1. #1
    LF/ULF Carbon Printer Jim Fitzgerald's Avatar
    Join Date
    Aug 2007
    Location
    Vancouver Washington
    Posts
    3,929

    A Lightweight 14x17 Build

    At the end of June I started to design a lightweight 14x17. My current 14x17-20x24 is 32 lbs and I'll be 68 in a few days and it is getting harder to carry this beast. So I decided to build a new 14x17 that with all of the parts I have so far including the bellows is about 21 lbs. I'll have the camera finished in November I think or December at the latest. I have a commission for 40 clamshell Walnut presentation cases that is taking priority. Still I manage to squeeze in some camera building time. This will be my 4th 14x17 and when I'm finished I'll be selling the big 14x17 system complete with a Kondos portage Canoe pack and brass lens. Film and holders I'm keeping as I'll still be shooting the format. I'll sell the camera for a very good price when the time comes.
    Attached Thumbnails Attached Thumbnails fullsizeoutput_3bb0.jpg   fullsizeoutput_3bae.jpg   fullsizeoutput_3bb3.jpg   IMG_6391.jpg  

  2. #2
    Vaughn's Avatar
    Join Date
    Jan 2007
    Location
    Humboldt County, CA
    Posts
    9,211

    Re: A Lightweight 14x17 Build

    Looking great!
    "Landscapes exist in the material world yet soar in the realms of the spirit..." Tsung Ping, 5th Century China

  3. #3
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,384

    Re: A Lightweight 14x17 Build

    Yes, looks good.

    What size bellows are you using?

    If you would supply all dimensions specified to the maker?
    Tin Can

  4. #4
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,384

    Re: A Lightweight 14x17 Build

    Jim, I am not casually asking. But I am curious.

    2 years ago I ordered from Custom Bellows. Dimensions below. They made them perfectly to spec.

    As I will be using 14X17 X-Ray film holders, the long dimension is not 17 but 16" More rebate on the exposed film. Perhaps intentional by the film holder maker to help control film flop?

    Small end: ID 8 inches OD 10 inches square (this is a change)

    Big end: ID 14 inches OD 16 inches square

    Length: 40 inches extended. Closed bellows NA

    Corners: Truncated


    Due to personal delays I have not completed my camera, yet I have all parts. I moved...
    Tin Can

  5. #5
    LF/ULF Carbon Printer Jim Fitzgerald's Avatar
    Join Date
    Aug 2007
    Location
    Vancouver Washington
    Posts
    3,929

    Re: A Lightweight 14x17 Build

    Custom Bellows make all of my bellows. I’ll have to measure everything when I get home. I’m in Astoria for an opening now and will be back tonight.

  6. #6

    Join Date
    Apr 2009
    Location
    Chicago, IL
    Posts
    191

    Re: A Lightweight 14x17 Build

    Such beautiful construction and wood. Let us know how the new lightweight design works

  7. #7

    Join Date
    Mar 2016
    Posts
    232

    Re: A Lightweight 14x17 Build

    Do you make the springs yourself? Any tips on DIY springs, or sources for parts would be gratefully received. I'm in the process of making an 8x10 back together and hope to make a 10x12 back later on, springs are a sticking point for me. I've read elsewhere here that old hacksaw blades are a good option, but your brass springs look very good.

  8. #8
    LF/ULF Carbon Printer Jim Fitzgerald's Avatar
    Join Date
    Aug 2007
    Location
    Vancouver Washington
    Posts
    3,929

    Re: A Lightweight 14x17 Build

    Randy, because this is a field camera ( I have a 14x17 studio camera) the bellows I ordered from Custom Bellows were:

    Rear ID 17 9/16 x 17 9/16 OD 18 9/16 x 18 9/16 inches.

    Front ID 8 x 8 OD 9 x 9 inches

    Length extended. (useable) 34 inches

    Compressed 2 inches.

    Truncated corners with bellow tabs.

    This is what will work for this camera.

    Hope it helps. I'll post more pictures of the build as I go. The fun part is ahead. The hard part, tieback is done.

  9. #9
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,384

    Re: A Lightweight 14x17 Build

    Jim,

    Yes that helps. Mine will be studio use only.

    The Custom Bellows do lay down very nicely.

    Too late now, but I realize I should have made the rear bigger. But as a studio camera I can make it work.

    Thank you!
    Tin Can

  10. #10
    LF/ULF Carbon Printer Jim Fitzgerald's Avatar
    Join Date
    Aug 2007
    Location
    Vancouver Washington
    Posts
    3,929

    Re: A Lightweight 14x17 Build

    Randy, no problem. Any questions just let me know. I always take my time building these things. It just has to be. I always think of a better way to do something and then have to do something over. Just my way of learning. It's all good.

Similar Threads

  1. 14x17 film holder build question
    By Paul Kinzer in forum LF DIY (Do It Yourself)
    Replies: 35
    Last Post: 6-Jan-2020, 18:00
  2. 14x17 build, with filmholders and tripod
    By radii in forum LF DIY (Do It Yourself)
    Replies: 93
    Last Post: 4-Dec-2017, 08:17
  3. Planning 14x17 Camera Build
    By jon.oman in forum LF DIY (Do It Yourself)
    Replies: 6
    Last Post: 28-Feb-2015, 19:04
  4. 14x17 Camera build.....the last one??
    By Jim Fitzgerald in forum Cameras - ULF (Ultra Large Format) and Accessories
    Replies: 9
    Last Post: 25-Jan-2011, 07:56

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •