I have a Schneider Angulon f6.8 mounted in a Synchro-Compur Press shutter. At f32 I am getting exposures that are at least 1 and 1/2 stops under exposed on Velvia 100. My typical shutter speeds so far have been 1/10 to 1 second. I have been using it for landscape shots so there is no bellows factor correction needed. I had Grimes do a CLA on the shutter when I first got it and the times seem to be right, besides before the CLA the slow shutter speeds were to long which would have resulted in overexposure not underexposure. I have been using the meter in my Nikon N80 35mm camera and a similar composition with the same film comes out properly exposed from that camera. Last time I used the Angulon at f32 I just used my shutter time from the N80 when the aperture was set at f22, the transparency from the Angulon shot was still just a little (~1/2 stop) underexposed. Could the f32 setting on the Angulon aperture scale be more like f45+? Any other ideas?
Bookmarks