Results 1 to 7 of 7

Thread: Ilford Ilfospeed 500 Enlarger System Reusability?

  1. #1

    Question Ilford Ilfospeed 500 Enlarger System Reusability?

    Hi there,
    I have just disensembled a complete Enlarger System in my parents-in-law house which was given to them by a photographer many years ago.
    What to do wiith this professional yet out-of-date system?
    Is there a market for this? Cannot find anything on www...
    Does anyone need spare parts?
    What else to consider?
    Thanks a lot for any kind of feedback!
    Andreas

  2. #2

    Join Date
    Dec 2014
    Location
    Suwanee, GA
    Posts
    254

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    I assume your are referring to Ilford Multigrade 500H system. It should have a controller 500C or 500CPM, a power source 500S, and maybe some other accessories such as the ilford safelight or foot switch. It also depends which enlarger it was set up for Beseler or durst or modified for other. There should be some white mixing boxes that fit inside the head that are the size of film they support 4x5, 2x2 , 1.5x1 etc...

    Some pictures would go a long way to answering your questions. You can find one or two of these on ebay for pricing comparison if yours works.
    The mountain waters of North Georgia call out to me, I visit and leave only tripod holes behind. The Appalachian Trail is my treadmill and gym.
    http://www.esearing.com

  3. #3

    Join Date
    Feb 2008
    Location
    The Highlands of Scotland
    Posts
    109

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    The Ilford Multigrade 500 system is very sought after by serious darkroom aficionado's.

    As mentioned, the core system consists of the head, the controller and the power supply. There are a number of diffuser (35mm, 6x7mm and 5x4) mixing boxes depending on the negative format being used.

    Ilford made a number of adapters to fit the professional enlargers of the time, such as Durst.

    I think you'll find a ready need for the parts or even as a whole kit as they stopped making this equipment sometime in the 80's.

    Mike

  4. #4
    8x10, 5x7, 4x5, et al Leigh's Avatar
    Join Date
    Dec 2010
    Location
    Maryland, USA
    Posts
    5,158

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    Quote Originally Posted by mpirie View Post
    The Ilford Multigrade 500 system is very sought after by serious darkroom aficionado's.
    I use one of those on my Beseler 45MX as my only printing light source.

    It's an absolutely excellent system, providing fine control of both contrast and time.
    And it's plenty bright, using two 500-watt halogen bulbs, one filtered to blue, the other to green.

    It is for black&white only. You cannot use it for (normal) color.

    - Leigh
    If you believe you can, or you believe you can't... you're right.

  5. #5

    Join Date
    Jan 2013
    Location
    Madisonville, LA
    Posts
    1,559

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    Quote Originally Posted by Andytigerente View Post
    Hi there,
    What to do wiith this professional yet out-of-date system?
    Thanks a lot for any kind of feedback!
    Andreas
    What’s out of date about it? Would also help if you posted the enlarger and the format size.

  6. #6

    Join Date
    Feb 2007
    Location
    South Australia Pt.Willunga
    Posts
    170

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    I have the Ilford 500 series system mated to a RHDesign AnylserPro 500
    this is fantastic combination,the blue and green filtered light is calibrated perfectly to Ilford paper grade.
    you will need to calibrate the setup for each paper type you use but this is not to hard to do.
    here is a x-ray print as printed using Gd3 Contact print 8x10 Click image for larger version. 

Name:	2018-01-18-0002.jpg 
Views:	4 
Size:	100.5 KB 
ID:	178610

  7. #7
    Jac@stafford.net's Avatar
    Join Date
    Dec 2012
    Location
    Winona, Minnesota
    Posts
    4,531

    Re: Ilford Ilfospeed 500 Enlarger System Reusability?

    I use the same on a 4x5 enlarger and the only problem I found was a bad electrical connection to a bulb. An easy soldering repair and all is still good.

Similar Threads

  1. Voltage Stabilizer for Ilfospeed 500 VC head
    By davidrcarls in forum Darkroom: Equipment
    Replies: 8
    Last Post: 2-Aug-2013, 16:42
  2. Ilfospeed 500 Controller Issues
    By coat953 in forum Darkroom: Equipment
    Replies: 5
    Last Post: 25-Jun-2013, 02:33
  3. Information please? - Ilford Multigrade 500LE System
    By Shen45 in forum Darkroom: Film, Processing & Printing
    Replies: 0
    Last Post: 22-Jan-2012, 21:13
  4. Ilford 500 System
    By Raven Garrow in forum Darkroom: Equipment
    Replies: 4
    Last Post: 18-Sep-2000, 22:13

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •