Results 1 to 5 of 5

Thread: Apo Ronar ad infinitum!

  1. #1

    Apo Ronar ad infinitum!

    Hi!

    I have good news to share: Linos will on request adjust (shim) an Apo Ronar for infinity. I was so thrilled that I forgot to ask the cost, but the charge for adjusting a lens to a shutter is 80,- EUR, and I exspect something in that range.

    My source is Hr. Dieter Wenzel --Dieter.Wenzel-at-linos.de, who has authorized me to share this info. He is on holiday from the 20. august to the 13. september.

    He says that the difference is visible in the periphery, wheras the central parts will be equally sharp at infinity and close-up with either adjustment.

    We also discussed swapping shutters in general. He confirmed the impression which was my own bottomline from discussions on this forum, namely that lens spacing is absolutely critical for modern/wide-angle lenses, and less so for older/narrower lenses. His opinion is that swapping always implies a risk of de-adjustment, and should be done at the factory. Depending on lens type, they use shims of 0.1 mm or 0.01 mm thickness.

    Former threads on this topic included:
    www.largeformatphotography.info/lfforum/topic/498712.html
    www.largeformatphotography.info/lfforum/topic/502086.html

    Good light! - Hening.
    Hening

  2. #2

    Join Date
    Jun 2005
    Posts
    2,480

    Apo Ronar ad infinitum!

    Hening, many thanks for the useful info!

  3. #3

    Join Date
    Mar 2002
    Location
    Knoxville, Tennessee
    Posts
    1,789

    Apo Ronar ad infinitum!

    Hening

    An interesting and useful bit of information. Thanks for contributing.

    However, I queston the 0.01mm shim. That's 0.0004 or 4 ten thousandths of an inch. If I needed 0.15mm than I'd need six shims; one 0.1 and five 0.01.I've never seen a lens with more than one shim.

    Steve

  4. #4

    Apo Ronar ad infinitum!

    Hi Steve,

    It looks like I have probably distortet something. Probably he said something like "to a precision level of 1/10 or 1/100 mm" ("auf 1/10 oder 1/100 mm genau"). This says nothing about the thickness of the shims. So for an adjustment of 0.15 mm, one shim of exactly this thickness could be used.

    Good light anyway - Hening.
    Hening

  5. #5

    Join Date
    Jun 2005
    Posts
    2,480

    Apo Ronar ad infinitum!

    You are right Henning, it is easy to make an exactly thick shim. It is an important message that you posted - it gives a new life to Ronars!

Similar Threads

  1. APO-Ronar vs. APO-Ronar-CL ??
    By Harley Goldman in forum Lenses & Lens Accessories
    Replies: 50
    Last Post: 17-Dec-2015, 15:59
  2. 480mm Apo Ronar
    By Mark Sawyer in forum Lenses & Lens Accessories
    Replies: 6
    Last Post: 9-Oct-2004, 14:28
  3. APO Ronar 300 f9 and 480 f9
    By Eirik Berger in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 21-Nov-2003, 10:37
  4. APO Ronar as convertible
    By Steve Clark in forum Lenses & Lens Accessories
    Replies: 7
    Last Post: 24-Apr-2002, 08:03
  5. 480 APO Ronar coverage?
    By Linas Kudzma in forum Cameras & Camera Accessories
    Replies: 8
    Last Post: 12-Mar-2002, 11:44

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •