Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: What to do for a case for a Kodak 2D 11x14 camera?

  1. #1

    Join Date
    Jan 2010
    Posts
    58

    What to do for a case for a Kodak 2D 11x14 camera?

    Currently I'm using a boxfan box, that's had some padding added, and that I've used Duct Tape to reenforce, to house my 11x14 camera. I'm wondering what others, especially others with a Kodak 2D are doing.

    Thanks,
    Zane

  2. #2

    Join Date
    May 2015
    Location
    SooooCal/LA USA
    Posts
    1,071

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    I would start by hitting the thrift stores for a hard or soft walled suitcase... Keep looking to see what else shows up, like fiber or (heavier) Anvil type cases...

    A woodworker can make a nice lightweight case from thin sheet plywood with a wood or thin angle aluminum frame...

    Or buying or making a fabric pouch-like case, or a backpack/frame like rig...

    Or shell out $$$ for something custom or out there now...

    Steve K

  3. #3

    Join Date
    Dec 2013
    Location
    Washington, DC
    Posts
    44

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    For my 11x14 Korona, with very similar dimensions, I’m using a “Gator Cases G-MIXERBAG-2118 Padded Nylon Mixer/Equipment Bag.” It is soft sided, and can fit two film holders in the outer zippered pocket.

  4. #4

    Join Date
    Jan 2010
    Posts
    58

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    Quote Originally Posted by LabRat View Post
    I would start by hitting the thrift stores for a hard or soft walled suitcase... Keep looking to see what else shows up, like fiber or (heavier) Anvil type cases...
    An old heavy-duty 1960's or 70's era suitcase was my original Deardorff V8 case. I upgraded to a Thinktank pack earlier this year.

    Quote Originally Posted by LabRat View Post
    A woodworker can make a nice lightweight case from thin sheet plywood with a wood or thin angle aluminum frame...
    I was leaning towards something like this, but wondering if anyone knew of a better solution. Realistically this is a better solution than where I was headed. I'd not considered an Aluminum frame. I'll need to look into this option.

    Something I have considered is a Pelican 1630 or 1640.

    Thanks,
    Zane

  5. #5

    Join Date
    Jul 2006
    Location
    Collinsville, CT USA
    Posts
    686

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    I have an 11x14 Chamonix. Found a very well padded used TENBA cloth case that the 11x14 and 2 or 3 film holders fit into quite nicely. I was then able to put together an insert made of corrugated plastic board that I found art a Dick Blick Art store. It added rigidity and some protection to the camera, holders, and case. The insert was constructed with duct tape on the outside where the boards met and a generous amount of hot glue running along the inside seams. Bottom of the fabricated insert is comprised of 4 sheets of the corrugated plastic board, each sheet being at a 90 degree angle with the one underneath it. Whole case is very light when empty. I have been amazed at how well the case has held up. Once a friend accidentally bumped into the loaded case and knocked it over on its side (a heart stopper to watch), but the contents remained unharmed. Total cost was well under $100. The TENBA case has only a "TENBA" tag on it and no model number. Inside measures (very) approximately 7" x 22" x 20" deep. Top has a zippered opening flap and 2 handles. I've seen other cases like the one I acquired remain unsold on that auction site, and the asking prices were well under $100.

    Also have a hard sided Pelican for the 11x14 but prefer the TENBA because when loaded it is a whole lot lighter to carry around.

    Per the next post, the corrugated plastic material is called Coroplast... thanks Randy Moe
    Last edited by Greg; 30-Dec-2017 at 17:29. Reason: added info

  6. #6
    Randy Moe's Avatar
    Join Date
    Dec 2011
    Posts
    8,519

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    I bought this. Very light, cheap and very protective. Fits 11x14, a giant dark cloth and one lens in a case. Holders are separate in a 5 holder padded case. One for each hand. I don't use the side bag, it removes. It would fit a holder maybe 2, but it's not padded well. I added full case size sheet of 10mm Coroplast to protect the GG.

    http://gatorcases.com/products/mixer...-g-mix-l-1822/

    I don't backpack. I put it inside my pickup cap covered in a Bed Rug and it becomes invisble.

  7. #7

    Join Date
    May 2010
    Location
    Kalamazoo, Michigan
    Posts
    105

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    I bought the Gator case for my Century 11x14. No regrets!
    Terry

  8. #8
    Vaughn's Avatar
    Join Date
    Jan 2007
    Location
    Humboldt County, CA
    Posts
    6,423

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    Those Gator bags look nice. My 11x14 is about 18" sq by 6". They have a nice bag that should fit it and have room for 3 holders and the darkcloth. Heavily padded, it might fit nicely on a packpack frame -- something for me to think about. The old military suitcase I use sort of sucks, and the handle just broke. One just has to be careful not to go with a nice light-weight camera, only to add too many pounds with the case!

    http://gatorcases.com/products/lcdpl...e-gl-lcd-1922/
    "Landscapes exist in the material world yet soar in the realms of the spirit..." Tsung Ping, 5th Century China

  9. #9

    Join Date
    Jan 2010
    Posts
    58

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    Quote Originally Posted by Randy Moe View Post
    Holders are separate in a 5 holder padded case.
    I was thinking about a Gator Bag for the film holders. It sounds like you're using a bag closer to what i use for 8x10 film holders. Is it something you had custom made, or something someone sells?

  10. #10

    Join Date
    Jan 2010
    Posts
    58

    Re: What to do for a case for a Kodak 2D 11x14 camera?

    I really like the looks of the Gator Bags, in fact I've already gotten one other LF photographer interested in them, as a result of learning about them here. With the lens mounted, the Kodak 2D is about 18"(W)x20"(H)x8"(D), or about 6" deep without the lens mounted. It's wider than I'd like, but the G-MIXERBAG-2621 looks like a it might be the best fit.

Similar Threads

  1. Camera case for Kodak Master
    By nonuniform in forum Cameras & Camera Accessories
    Replies: 7
    Last Post: 15-Feb-2015, 14:26

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •