Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Anyone ever try this??? 3D custom board issue

  1. #1

    Join Date
    Jul 2017
    Posts
    12

    Anyone ever try this??? 3D custom board issue

    I printed this, but i'm having trouble with it...

    I didn't design it, i just downloaded the file.

    Description says i don't need to screw the lens in (it wont screw in very much anyway), but the lens wont stay put very well.
    Gaffers tape might work, but I'm hoping someone else has figured this board out. The lens actually fell out while I was focusing it. Thankfully it didn't hurt the lens.

    Here's the link.

    https://www.thingiverse.com/thing:1569931

    Thanks.
    -A.
    Last edited by Monza1966; 30-Aug-2017 at 17:32. Reason: forgot information

  2. #2

    Join Date
    Aug 2013
    Location
    Atlanta, Georgia USA
    Posts
    1,002

    Re: Anyone ever try this??? 3D custom board issue

    "This model does not require to screw the lens, since it has been designed to fit tight and hold the back of the lens."

    YIKES! I don't think I would trust a HEAVY and expensive Aero Ektar lens to a friction fit!

  3. #3

    Join Date
    Jul 2017
    Posts
    12

    Re: Anyone ever try this??? 3D custom board issue

    It screws in a few threads, but not much at all. It was the only board i could find....
    I'll temporarily add foam for it to rest on the rails with and graffers tape to the flange.

    i'm upset that it already dropped.....tiny dent now.....thankfully the glass is okay.

  4. #4
    Jim Jones's Avatar
    Join Date
    Aug 2006
    Location
    Chillicothe Missouri USA
    Posts
    2,379

    Re: Anyone ever try this??? 3D custom board issue

    Maybe a large hose clamp could tighten it enough to hold the Aero Ektar. Slots cut in the cylindrical section would improve clamping strength.

  5. #5

    Join Date
    Apr 2009
    Location
    Seattle area, WA
    Posts
    864

    Re: Anyone ever try this??? 3D custom board issue

    Be careful what 3d printing material you choose. Some of the cheaper materials aren't very strong and I could see the whole board just cracking apart. Otherwise the idea to use some sort of rubber hose clamp seems like a good "backup" retaining device on that board.

  6. #6

    Join Date
    May 2008
    Location
    El Cajon, CA
    Posts
    653

    Re: Anyone ever try this??? 3D custom board issue

    Whoa! That thing looks scary! I spent the money for a Jo-Lo board for my Speed. It was worth the price to avoid the grief of risking my Aero-Ektar to the dreaded drop test. I'm sure even a simple home brew aluminum board would be preferable to the almost certain failure of that plastic thing.

    m
    Michael Cienfuegos

  7. #7

    Join Date
    Jul 2016
    Posts
    1,273

    Re: Anyone ever try this??? 3D custom board issue

    Quote Originally Posted by AtlantaTerry View Post
    "This model does not require to screw the lens, since it has been designed to fit tight and hold the back of the lens."

    YIKES! I don't think I would trust a HEAVY and expensive Aero Ektar lens to a friction fit!
    Printing density and material is important, IMHO if it is ABS and 90% density if can be suitable, if the lens is also secured in the back ...beyond friction.



    It is exciting what one can do today with printers... Of course it should be well designed and printed, , as always, a weak part can also be produced.

    Even, if one wants extra strong parts one can just print the mold of the part with PE, and filling it with tech resin with a load of cut fiberglass, also perforated metal platings can be placed inside the mold before filling with resin. This allows to make a series of parts, very strong and cheap parts, and fast... Depending on additives parts can be demolded in 15min, and mold can be reused dozens of times.

    This an ABS lens board, well reinforced, I made for a Lomo O-2 600mm:




    Now I'm also finishing a Sinar to Cambo adapter, I've printed the ABS part yet, and I'm to cut the metal parts with a waterjet to finish it. It will take my beloved Symmar 360mm, this is 2kg. The AE 178 is 1/2 Kg lighter.


    Click image for larger version. 

Name:	DSC_0838.jpg 
Views:	25 
Size:	25.8 KB 
ID:	169362

    Click image for larger version. 

Name:	SP32-20170906-155843.jpg 
Views:	27 
Size:	36.7 KB 
ID:	169363




    BTW, if somebody wants the Sinar to CAMBO files I would send it to him, for free, of course.

  8. #8

    Join Date
    Jul 2017
    Posts
    12

    Re: Anyone ever try this??? 3D custom board issue

    Quote Originally Posted by Michael Cienfuegos View Post
    Whoa! That thing looks scary! I spent the money for a Jo-Lo board for my Speed. It was worth the price to avoid the grief of risking my Aero-Ektar to the dreaded drop test. I'm sure even a simple home brew aluminum board would be preferable to the almost certain failure of that plastic thing.

    m
    He doesn't make them anymore. I luckily found a guy in Croatia that made a few metal boards years ago, and he had an extra one he sold me.

  9. #9

    Join Date
    Jul 2012
    Location
    Stockton, California
    Posts
    817

    Re: Anyone ever try this??? 3D custom board issue

    3D printing with any type of plastic is not structural ... proceed at your own risk

    3D printing with metals (DMLS) is expensive

    Make yourself a board out of aluminum or pay someone to do it for you, not worth breaking any glass over it.

    Cheers,

    Rudi A.

  10. #10

    Join Date
    Jun 2015
    Posts
    58

    Re: Anyone ever try this??? 3D custom board issue

    I made a mini Technika 6x9 board out of Shapeways' Strong and Flexible plastic which supposedly has good dimensional stability/rigidity despite the name. Relative to height and width, the board is inherently thick, so we'll see what happens. Specifically, I built a recessed board and a flat board. I'll report back with what happens:


Similar Threads

  1. Recessed lens board issue
    By Ganko in forum Lenses & Lens Accessories
    Replies: 8
    Last Post: 22-Jan-2012, 06:10
  2. Help with a lens board issue
    By ninevoltdesign in forum Lenses & Lens Accessories
    Replies: 2
    Last Post: 21-Oct-2011, 19:09
  3. Custom lens board maker
    By ElRooster in forum Resources
    Replies: 1
    Last Post: 26-Jan-2011, 16:38
  4. Mat Board and Custom Cutting Service
    By Michael Kadillak in forum Resources
    Replies: 8
    Last Post: 28-Aug-2006, 07:25

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •