Results 1 to 5 of 5

Thread: DIY lensboards??

  1. #1

    Join Date
    Jul 2017
    Posts
    12

    Question DIY lensboards??

    I couldn't find the exact answer to my question from searching the forums.... I recently acquired a Speed Graphics 4x5 with the intent to use barrel lenses and other large lenses.
    However I over looked the fact about lens boards. I know it's possible to use Aero Ektars, large petzvals, or any other large lens on the speed graphic. I've seen the JoLo stuff (plus he doesn't sell JoLo44 anymore) , but I know people for decades didn't use his equipment.

    Any links to step by step instructions (with images)?
    Or does anyone 3D print them?
    Or selling a JoLo44 plate?

    Again, I have a Speed Graphic, not a Pacemaker.
    I'd like to use an Ektar or 8" Pentac soon.

    Thanks,
    A.

  2. #2

    Join Date
    Jun 2017
    Location
    Corvallis, OR
    Posts
    114

    Re: DIY lensboards??

    I 3D printed a lens board for my Deardorff for my Schneider Symmar-S 240. I just designed something from scratch, based on my other lens board.

  3. #3

    Join Date
    Aug 2013
    Location
    Atlanta, Georgia USA
    Posts
    1,002

    You could just buy one.

    There are several eBay sellers who custom make lens boards. One makes his out of alternating layers of strong plywood for several models of Graphic cameras including your Speed Graphic. Another is 3D printing boards.

    Try clicking this search result:
    https://www.ebay.com/dsc/Cameras-Pho...x_kw=&_in_kw=1
    Last edited by AtlantaTerry; 10-Aug-2017 at 21:45. Reason: Additional information.

  4. #4

    Join Date
    Feb 2001
    Location
    Shodoshima, Japan
    Posts
    828

    Re: DIY lensboards??

    I have a couple of Speed Graphic boards with 63 and 65mm openings. I don't know the exact opening size you need, but it should not be difficult to enlarge them. Send me a message if you'd like to buy.

    Kumar

  5. #5

    Join Date
    Jul 2017
    Posts
    12

    Re: DIY lensboards??

    I ran across this... https://www.thingiverse.com/thing:1569931 The back side looks odd to me. I thought the Ektar stuck out a bunch?? What am I looking at?

    I have no experience with 3D printing or the Aero Ektar, but I've heard people saying the Speed Graphic (non pacemaker) has to have its front standard modified. Anyway to avoid changing the front standard? I'd rather just have a custom lens board.

Similar Threads

  1. lensboards
    By Brian Danieli in forum Cameras & Camera Accessories
    Replies: 0
    Last Post: 28-Apr-2004, 09:10
  2. lensboards
    By dave bulmer in forum Gear
    Replies: 4
    Last Post: 10-Feb-2004, 17:27

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •