Results 1 to 3 of 3

Thread: Linhof Heavy Duty leveling head - Repair?

  1. #1

    Join Date
    May 2012
    Location
    Jacksonville Florida
    Posts
    24

    Linhof Heavy Duty leveling head - Repair?

    I have a Linhof leveling head with 90mm base. I think it is from the 1950's or 1960's. The clamping mechanism works great when the head is at an angle and will support the heavy Kardan-Master TL. However when used at the horizontal level, i.e. not tilting, it will not clamp tight enough because the clamping lever comes to the end of it's travel before being completely effective. Is there a simple fix to this. I tried getting around the problem by tilting the camera base but the 4x10 back I have will not rotate back to vertical.

  2. #2

    Join Date
    Sep 1998
    Posts
    10,357

    Re: Linhof Heavy Duty leveling head - Repair?

    Precision Camera in Niles, IL

  3. #3
    Vanannan
    Join Date
    Nov 2004
    Location
    Isle Of Man
    Posts
    491

    Re: Linhof Heavy Duty leveling head - Repair?

    I had a similar problem, I cannot attempt to give you instruction but I removed the leather from the top and base revealing three screws on each, I removed the top and bottom and 'played around' with tension and lubricants till I got it right, nothing very complicated, cost nothing, has worked perfectly ever since.

    Best wishes.

Similar Threads

  1. Best Head for a Heavy-Duty Linhof Tripod ?
    By Ron Bose in forum Gear
    Replies: 4
    Last Post: 10-Mar-2007, 16:25

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •