Results 1 to 8 of 8

Thread: KEARSARGE 502 Timer: Looking for Instructions Manual

  1. #1

    Join Date
    Mar 2014
    Location
    Philadelphia, Pa.
    Posts
    11

    KEARSARGE 502 Timer: Looking for Instructions Manual

    I just got a Kearsarge 502 Timer, but it came without a manual. Does anyone happen to have a copy???

    I would like to be able to use this on a Beseler CB7 with colorhead. I currently have a Kearsarge 300 series timer on the enlarger, and it works just fine with the power cables daisy-chained so that from the colorhead transformer it goes into the timer, and from there to the fan/blower.

    With the 502 timer, I don't even know which plug receptacle in the back to use, not to mention what all these buttons do!

    Thank you.

    Click image for larger version. 

Name:	Kearsarge502_1.jpg 
Views:	30 
Size:	73.3 KB 
ID:	165256Click image for larger version. 

Name:	Kearsarge502_2.jpg 
Views:	21 
Size:	57.9 KB 
ID:	165257

  2. #2
    Robert Bowring
    Join Date
    Nov 2010
    Location
    Wauwatosa Wisconsin
    Posts
    76

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    I have a Kearsarge 403 timer and instruction manual. The timer looks somewhat similar to your timer. I don't know if they work the same way but I could send you the 403 instructions. It looks like your timer is set up to handle 2 enlargers and 2 safelights. On my timer the enlarger plugs into "500 watts timed on" and the safelight plugs into "300 watts timed off". There is also very specific instructions on how to hook up a power supply and voltage stabilizer. Apparently if you hook them up wrong you can fry the timer so be careful. I also have a Kearsarge 301 timer but did not get the instructions for that one. It was pretty simple to figure that one out. I would have never figured out the 403 without the instructions. These are very good timers and if I remember correctly they were very popular back in the day but it is almost impossible to find any information about them today. I am not much of a computer guy but if you email me maybe I can figure out how to scan and send the instructions to you. If not, you can send me your address and I will mail you a copy. bowring.robert@att.net

  3. #3

    Join Date
    Mar 2014
    Location
    Philadelphia, Pa.
    Posts
    11

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Many thanks, Robert. The manual for the Kearsarge 403 that you sent was super helpful.

    I have since scanned the manual into a PDF. So if anyone happens to need a copy, please message me on here and I'd be glad to pass it forward.

  4. #4

    Join Date
    Feb 2013
    Posts
    172

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Maybe you should contact Dick Butkas and send him a copy of the manual.

  5. #5

    Join Date
    Jul 2010
    Location
    Ontario, Canada
    Posts
    657

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Quote Originally Posted by MrFujicaman View Post
    Maybe you should contact Dick Butkas and send him a copy of the manual.
    Since the 'OP' may or may not be familiar with that Web Site...

    http://www.butkus.org/chinon/index.html

    If this is against any LFPF Usage Guidelines... The Mods of course can kindly remove the URL.
    Thank-you!

    -Tim.
    _________

  6. #6
    Robert Bowring
    Join Date
    Nov 2010
    Location
    Wauwatosa Wisconsin
    Posts
    76

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Glad it helped you. Good luck

  7. #7

    Join Date
    Mar 2014
    Location
    Philadelphia, Pa.
    Posts
    11

    Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Hi, yes. I've used that site a lot. I'll donate a copy there.

    Thank you.

  8. #8

    Cool Re: KEARSARGE 502 Timer: Looking for Instructions Manual

    Hey Guys!
    I'm new to the site here, but not new in many ways :-}
    found the discussion about the Kearsage 502 here and I'm would be ever so grateful to receive a digital copy of the mentioned manual.
    I've been using this thing for about 25 years with out the benefit of actually knowing all of what it is capable.
    I've figured out the basics of saving exposure times in the four slots, the overtime/overrun etc
    Obscura.Lucida! would you be so kind to email me your scan?

Similar Threads

  1. Kearsarge 301 Timer
    By Robert Bowring in forum Darkroom: Equipment
    Replies: 1
    Last Post: 6-Nov-2010, 20:52

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •