Page 8 of 19 FirstFirst ... 67891018 ... LastLast
Results 71 to 80 of 186

Thread: TravelWide Repair Question

  1. #71

    Join Date
    Nov 2017
    Posts
    653

    Re: TravelWide Repair Question

    If this is a flat piece (could be made out of plate) and you have a dxf file, then why not ask someone with a lasercutter or waterjet cutter? Could be a cheap and fast way to have small batch made. Certainly if the holes are the same size or larger than the thickness. If you go metal then maybe it could be made thinner to arrive at that condition. Then inox might even be the cheapest option. (steel is cheaper but will need work or it rusts)
    Expert in non-working solutions.

  2. #72

    Join Date
    Mar 2011
    Location
    Germany
    Posts
    475

    Re: TravelWide Repair Question

    Creating a dsx.file for making a little series requires wellknown dimensions.
    This plastic pieces are somehow wobbling, the holes are broken.
    Measuring became hard and unprecise.
    For this task and concerning the tiny dimensions of the holes lasercuttung would not be my first idea.

  3. #73

    Join Date
    Nov 2017
    Posts
    653

    Re: TravelWide Repair Question

    OK, no problem. I don't have a travelwide so it is hard to have an idea how large the pieces are from a photo without references. But I regulary have steel parts laser cut for hobby use and this is surprisingly affordable IF you can find a willing supplier.

    If the holes are so fine (from what I understand about 1mm) then "wire cutting" would be a good way to make them. Not as cheap as laser cutting but still affordable. Try to find a toolmaker, someone that makes injection dies for plastic or so. Sadly I don't have relations in that world anymore.

    But I think that waterjet cutting might be possible. If you have a .dxf, send it on (PM) I could ask my supplier. If you have a sketch with dimensions then I can make a .dxf if needed.
    Expert in non-working solutions.

  4. #74
    Tin Can's Avatar
    Join Date
    Dec 2011
    Posts
    22,319

    Re: TravelWide Repair Question

    Do we have a count on how many want a repair?

    Perhaps a Poll?

  5. #75

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,408

    Re: TravelWide Repair Question

    A better question would be how many were produced and how many need repair?

  6. #76
    Do or do not. There is no try.
    Join Date
    Jan 2007
    Location
    Northeastern USA
    Posts
    983

    Re: TravelWide Repair Question

    There were 1026 backers, so the total number of cameras produced was around this. Of these, it looks like 237 were shipped in the 65mm fixed-focus configuration, so that means around 800 cameras have the focusing helicoid. I think it's safe to say that all of the 90mm versions need (or will eventually need) repair.

    Another interesting question is how many of these are being used. Mine isn't - it needs this repair

  7. #77

    Join Date
    Jul 2015
    Posts
    12

    Re: TravelWide Repair Question

    I’m in on any fix anyone can come up with

  8. #78
    Drew Bedo's Avatar
    Join Date
    Oct 2006
    Location
    Houston Texas
    Posts
    3,225

    Re: TravelWide Repair Question

    I need a fix for my TravelWide.

    The total production was something like 2,500 I think. Maybe only 2K, don't remember exactly.

    Don't know the nuts and bolts of this stuff, but I understood that commercial shops can now make parts in metals like Aluminum, Brass and Stainless Steel. Could the parts can be prototyped in plastic, then done in in metal?


    I have been away a bit. Read the last two pages and I am not sure that I understand: Will the machined ring approach work? Or is the 3D printed method the way to go?
    Drew Bedo
    www.quietlightphoto.com
    http://www.artsyhome.com/author/drew-bedo




    There are only three types of mounting flanges; too big, too small and wrong thread!

  9. #79

    Join Date
    Mar 2011
    Location
    Germany
    Posts
    475

    Re: TravelWide Repair Question

    Drew, the machined ring will work fine.
    If you have time to wait two or three days, I should be over the mountain and being able to present the result.
    A printed method only would repeat your problems, we really need more rigid stuff.

    Best,Ritchie

  10. #80
    Drew Bedo's Avatar
    Join Date
    Oct 2006
    Location
    Houston Texas
    Posts
    3,225

    Re: TravelWide Repair Question

    What is the current status of this issue?

    I understand that the Christmas season is upon us. I myself could not move forward with this in any way until January '18 in any case.

    At this point, just asking for an update.

    Holiday Cheers to all.
    Drew Bedo
    www.quietlightphoto.com
    http://www.artsyhome.com/author/drew-bedo




    There are only three types of mounting flanges; too big, too small and wrong thread!

Similar Threads

  1. Kalart repair question
    By Rael in forum LF DIY (Do It Yourself)
    Replies: 22
    Last Post: 31-Dec-2015, 18:02
  2. Sinar F2 4x5 repair question?
    By stradibarrius in forum Cameras & Camera Accessories
    Replies: 3
    Last Post: 26-Feb-2013, 17:16
  3. Toyo repair question - Help!!!
    By dhgustaf@gmail.com in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 7-Aug-2011, 09:38
  4. toyo-view g repair question
    By dhgustaf@gmail.com in forum Cameras & Camera Accessories
    Replies: 2
    Last Post: 5-Apr-2011, 08:19
  5. Bellows repair question
    By Iga in forum Cameras & Camera Accessories
    Replies: 14
    Last Post: 8-Apr-2010, 02:08

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •