Results 1 to 4 of 4

Thread: need a source for Tundra case dividers

  1. #1

    Join Date
    Aug 2013
    Location
    Atlanta, Georgia USA
    Posts
    997

    need a source for Tundra case dividers

    I recently picked up two Tundra equipment cases for a very good price - a medium and a large size.

    Evidently, Tundra went out of business some time ago.

    The problem is that I can't find a source of compatible dividers for these cases. If you haven't seen them, the dividers are a stiff corrugated board wrapped by grey padded fabric. The dividers slide into plastic "U" channels that have Velcro on the back which allows one to stick the channels to the case's fabric liner.

    I contacted the OEM (Underwater Kinetics) which is based in England but they say they only made the case shells and have no idea where I might find any Tundra dividers.

    Does anyone have any suggestions?


    Please note: I do not want "pluck and pull" foam because I want the flexibility to easily change the layout which is the reason I bought the Tundra cases in the first place.

    Thanks,
    Terry

  2. #2
    Drew Bedo's Avatar
    Join Date
    Oct 2006
    Location
    Houston Texas
    Posts
    2,126

    Re: need a source for Tundra case dividers

    Terry: Check this thread in the "IY forum on making dividers from corrugated plastic board ("Cooplast") and H&L compatible fabric. Might be what you need.

    http://www.largeformatphotography.in...t-for-Backpack
    Drew Bedo
    http://www.artsyhome.com/author/drew-bedo




    There are only three types of mounting flanges; too big, too small and wrong thread!

  3. #3

    Join Date
    Aug 2013
    Location
    Atlanta, Georgia USA
    Posts
    997

    Re: need a source for Tundra case dividers

    Quote Originally Posted by Drew Bedo View Post
    Terry: Check this thread in the "IY forum on making dividers from corrugated plastic board ("Cooplast") and H&L compatible fabric. Might be what you need.

    http://www.largeformatphotography.in...t-for-Backpack
    Thank you! That is the DIY information that I needed.

  4. #4
    Drew Bedo's Avatar
    Join Date
    Oct 2006
    Location
    Houston Texas
    Posts
    2,126

    Re: need a source for Tundra case dividers

    My own project is in slow motion right now, but I am sure that we all would like to see what you do, and how it was done . . .and how you use the result.
    Drew Bedo
    http://www.artsyhome.com/author/drew-bedo




    There are only three types of mounting flanges; too big, too small and wrong thread!

Similar Threads

  1. Source for Heavy Duty Print Shipping Case...
    By Kodachrome25 in forum Business
    Replies: 8
    Last Post: 7-Jan-2014, 21:39
  2. cutting fabric covered dividers of Lightware Case
    By Frank Petronio in forum Gear
    Replies: 5
    Last Post: 29-Jan-2005, 21:28
  3. Tundra Spotmeter: Discontinued when?
    By Alan Cecil in forum Style & Technique
    Replies: 1
    Last Post: 16-Oct-2000, 01:29

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •