Results 1 to 8 of 8

Thread: Using two different monolights

  1. #1

    Join Date
    Mar 2016
    Location
    Saint-Hyacinthe, Québec, Canada
    Posts
    48

    Question Using two different monolights

    Hi folks.

    I have two monolights: one Bowen Prolite 100 (500 w/s) and an Alien Bees B140 (140 w/s if I remember well).

    Using them for black and whites is a very easily done, but I'm worry that if I use them for colors, I may have problem with white balance.

    Am I wrong? Is using two different flashes makes difference or not?

    Thank you in advance for your answer and have a nice day!!!
    Jean-François aka Jeff (easier for English speaking persons )

  2. #2
    Christopher Barrett's Avatar
    Join Date
    Aug 2014
    Location
    BERWYN, IL!
    Posts
    386

    Re: Using two different monolights

    You'll likely have a little color variation due to the different flashtubes and electronics. Both will be balanced to daylight, though, and should be in ballpark proximity of each other.

    -CB

  3. #3
    Foamer
    Join Date
    Oct 2010
    Location
    South Dakota
    Posts
    2,430

    Re: Using two different monolights

    The wattage is different, so there might be a very small difference. Just try it and see. I assume you're using a Passport Colorchecker?


    Kent in SD
    In contento ed allegria
    Notte e di vogliam passar!

  4. #4

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Using two different monolights

    Quote Originally Posted by Christopher Barrett View Post
    You'll likely have a little color variation due to the different flashtubes and electronics. Both will be balanced to daylight, though, and should be in ballpark proximity of each other.

    -CB
    Depending on the power settings used. On basic moonlights color temperature will change with the selected power setting.
    Best is to take a Macbeth color checker, shoot it with each flash unit individually at each power setting on the flash and then compare the results. Just be sure to do it at the same distance, same camera and lens.

  5. #5

    Join Date
    Apr 2011
    Location
    Leipzig, Germany
    Posts
    512

    Re: Using two different monolights

    I used to work with two Multiblitz monolights and two Hensel heads on a separate generator. The former were on the warm side, the latter on the magenta side. It bothered me so much that I bought four new matching (Elinchrom) strobes. Good decision.

  6. #6
    Foamer
    Join Date
    Oct 2010
    Location
    South Dakota
    Posts
    2,430

    Re: Using two different monolights

    Also a chance that if flash are aimed at one spot, they could simply blend together. You'll have to test to see. Might be possible to gel one flash to make them match, but that can be a PITA.


    Kent in SD
    In contento ed allegria
    Notte e di vogliam passar!

  7. #7

    Join Date
    Mar 2016
    Location
    Saint-Hyacinthe, Québec, Canada
    Posts
    48

    Re: Using two different monolights

    Thank you for all your answers.

    I'll try with a pixels box before using them on films.

    Have a nice day!!!

  8. #8
    Martin Aislabie's Avatar
    Join Date
    Oct 2008
    Location
    Stratford-upon-Avon, England
    Posts
    783

    Re: Using two different monolights

    Flash tubes colour change with age - the number of cycles

    If colour balance is important to you then you need to run some tests with the equipment you have.

    Martin

Similar Threads

  1. Monolights
    By luis a de santos in forum Gear
    Replies: 21
    Last Post: 22-Jun-2011, 09:02
  2. Monolights
    By David Solow in forum Style & Technique
    Replies: 10
    Last Post: 18-Mar-2011, 18:03
  3. Monolights for table top
    By Dave Schneidr in forum Style & Technique
    Replies: 9
    Last Post: 9-Feb-2002, 16:27

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •