Results 1 to 3 of 3

Thread: Jonco FilmRunner temperature sensor recalibration

  1. #1
    Former Jazz+ Owner
    Join Date
    Nov 2012
    Location
    London
    Posts
    9

    Jonco FilmRunner temperature sensor recalibration

    Hello All,

    Hope the collective wisdom of this group might lead me to an answer....

    I have a jonco film runner - similar to Jobo Atl. It's mostly works but i think the temp sensor needs re-calibrating. I've inspected inside and there's five little variable resistors. I cannot work out there relationship to the sensors.... I was hoping someone might now before i go breaking it! To which I would add, the sensor leads interface with the main control board, unlike on Jobo's where the variable resistor is placed inline with the lead back to control board (a far simpler approach!)

    Or even know of a manual for the thing. I cannot find much information despite extensive session googling.

    Super thanks in advance.

  2. #2

    Join Date
    Oct 2013
    Posts
    7

    Re: Jonco FilmRunner temperature sensor recalibration

    Quote Originally Posted by mactastic View Post
    Hello All,

    Hope the collective wisdom of this group might lead me to an answer....

    I have a jonco film runner - similar to Jobo Atl. It's mostly works but i think the temp sensor needs re-calibrating. I've inspected inside and there's five little variable resistors. I cannot work out there relationship to the sensors.... I was hoping someone might now before i go breaking it! To which I would add, the sensor leads interface with the main control board, unlike on Jobo's where the variable resistor is placed inline with the lead back to control board (a far simpler approach!)

    Or even know of a manual for the thing. I cannot find much information despite extensive session googling.

    Super thanks in advance.

    I have a paper copy of the manual and some blueprints. If you are still interested, please let me know and i will scan them for you.

  3. #3
    Former Jazz+ Owner
    Join Date
    Nov 2012
    Location
    London
    Posts
    9

    Re: Jonco FilmRunner temperature sensor recalibration

    PM sent.... better late than never?!!

Similar Threads

  1. Epson V750 Sheet Scan, Up Sensor or Down Sensor?
    By RedSun in forum Digital Hardware
    Replies: 9
    Last Post: 3-Mar-2015, 07:05
  2. Fuji/Panasonic sensor 26.2 stops organic sensor
    By sanking in forum Digital Hardware
    Replies: 9
    Last Post: 14-Jun-2013, 07:50
  3. Jonco FilmRunner processor anyone?
    By Michal Makowski in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 3-Jul-2007, 13:00
  4. Gossen Luna Pro recalibration
    By Chris Gittins in forum Style & Technique
    Replies: 6
    Last Post: 30-Oct-2005, 06:44
  5. Luna Pro needs recalibration
    By Frank Kamm in forum Style & Technique
    Replies: 11
    Last Post: 25-Jul-1999, 22:48

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •