Results 1 to 6 of 6

Thread: Attaching polarizers to CFL lights

  1. #1

    Join Date
    Dec 2006
    Posts
    954

    Attaching polarizers to CFL lights

    I have a fairly crude light stand with two daylight balanced CFL bulbs. To cut down on reflections, I want to cross polarize. Any suggestions on how to mount 8x8 polarizing sheets below the lights so that they are not effected by heat from the lamps?

  2. #2

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Attaching polarizers to CFL lights

    Polarized copy lighting a also uses a polarizer on the lens with all of the polarizes aligned with each other. One way, if you don't have holders for your lights for the filters is to mount the filters to another set of light stands places in front of your lights. If you are using a copy stand like a Kaiser or a TTI then they do make polarizing filter holders for their lamp arms.z

  3. #3

    Join Date
    May 2015
    Location
    SooooCal/LA USA
    Posts
    2,802

    Re: Attaching polarizers to CFL lights

    The good news about using CFL's is that they generate much less heat than tungsten lights, so in a reflector, the gels can even be taped to the top of the reflector and hang with a little airspace at the bottom... Or a frame can be made with mattboard, plywood, etc to hold the gels... The gels can take low/medium heat, but not with hot tungsten lights, which require at least 1' of airspace between reflector & gel...

    The bad news about using CFL's & crosspolarization is that the CFL's have a much lower output than tungsten and the polarizing eats light like crazy, so your exposures will be very long... And the color balance tends to get weird with these, and have a "dead" looking effect without the highlights... If you need to get rid of most all of highlights (like shooting a plastic bag full of food or stuff, or heavily textured/reflective items, good, but for general work, kinda strange looking)... And metering the shot is very difficult without shooting a lot of Polaroids (in the old days)...

    I've been using CFL's for shooting macro a lot lately, and more than a foot away from the subject, the light falls off a lot, and you loose that small f-stop you started with... But excellent, cool, crisp light near the subject!!!

    Steve K

  4. #4

    Join Date
    Aug 2013
    Location
    Atlanta, Georgia USA
    Posts
    1,023

    Re: Attaching polarizers to CFL lights

    What about buying two inexpensive "clamp lights" from the hardware store? These come with large bowl-shaped reflectors. Screw the CFL bulbs into the socket then tape the Polarizing filters to the reflector and all is set to go.

  5. #5

    Join Date
    Sep 1998
    Location
    Loganville , GA
    Posts
    14,409

    Re: Attaching polarizers to CFL lights

    Quote Originally Posted by LabRat View Post
    The good news about using CFL's is that they generate much less heat than tungsten lights, so in a reflector, the gels can even be taped to the top of the reflector and hang with a little airspace at the bottom... Or a frame can be made with mattboard, plywood, etc to hold the gels... The gels can take low/medium heat, but not with hot tungsten lights, which require at least 1' of airspace between reflector & gel...

    The bad news about using CFL's & crosspolarization is that the CFL's have a much lower output than tungsten and the polarizing eats light like crazy, so your exposures will be very long... And the color balance tends to get weird with these, and have a "dead" looking effect without the highlights... If you need to get rid of most all of highlights (like shooting a plastic bag full of food or stuff, or heavily textured/reflective items, good, but for general work, kinda strange looking)... And metering the shot is very difficult without shooting a lot of Polaroids (in the old days)...

    I've been using CFL's for shooting macro a lot lately, and more than a foot away from the subject, the light falls off a lot, and you loose that small f-stop you started with... But excellent, cool, crisp light near the subject!!!

    Steve K
    It all depends on what LED lights you use. TV studios are lit with LED lights. So are most location news shots.

  6. #6

    Join Date
    May 2006
    Location
    grand rapids
    Posts
    3,851

    Re: Attaching polarizers to CFL lights

    Quote Originally Posted by Bob Salomon View Post
    It all depends on what LED lights you use. TV studios are lit with LED lights. So are most location news shots.
    He's using CFL's, not led's.
    To the op, your gels should be fine if they touch the lamps. The clip on idea is good though.

Similar Threads

  1. Polarizers
    By Peter De Smidt in forum Lenses & Lens Accessories
    Replies: 23
    Last Post: 10-Jul-2009, 12:07
  2. Circular and linear polarizers not the same after all?
    By bagdad child in forum Lenses & Lens Accessories
    Replies: 22
    Last Post: 2-Oct-2008, 10:03
  3. Polarizers for 90 f/5.6 SA XL
    By DrPablo in forum Lenses & Lens Accessories
    Replies: 5
    Last Post: 7-Sep-2006, 18:32
  4. polarizers
    By Mike Kovacs in forum Lenses & Lens Accessories
    Replies: 11
    Last Post: 7-Mar-2006, 10:38
  5. Gel Polarizers
    By Robert C. McColloch in forum Lenses & Lens Accessories
    Replies: 3
    Last Post: 25-Feb-2005, 19:18

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •