Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Metering Question For Head And Shoulders Portrait

  1. #1

    Join Date
    Oct 2013
    Location
    Doncaster UK
    Posts
    627

    Metering Question For Head And Shoulders Portrait

    If taking a Caucasian skin portrait photograph with natural light in a room where the light is more or less even, would you expose the face for Zone VI using a spot meter or would you just take an incident reading close to face

  2. #2

    Join Date
    Feb 2015
    Location
    Sheridan, Colorado
    Posts
    2,434

    Re: Metering Question For Head And Shoulders Portrait

    An incident meter with a hemisphere cone -- NOT a flat incident reader -- pointed at the camera.

  3. #3

    Join Date
    Oct 2013
    Location
    Doncaster UK
    Posts
    627

    Re: Metering Question For Head And Shoulders Portrait

    Quote Originally Posted by xkaes View Post
    An incident meter with a hemisphere cone -- NOT a flat incident reader -- pointed at the camera.
    Thank you

  4. #4
    Hack Pawlowski6132's Avatar
    Join Date
    Sep 2009
    Location
    Detroit - Come Visit
    Posts
    923

    Re: Metering Question For Head And Shoulders Portrait

    I use spot meter and expose to zone vi.

  5. #5

    Join Date
    Aug 2013
    Location
    Chicago
    Posts
    1,856

    Re: Metering Question For Head And Shoulders Portrait

    I use an incident meter, but will measure in several different directions to figure out and allow for light vs shadow. It probably wouldn't occur to me to take a picture in a place where the light was genuinely 100% flat.
    Thanks, but I'd rather just watch:
    Large format: http://flickr.com/michaeldarnton
    Mostly 35mm: http://flickr.com/mdarnton
    You want digital, color, etc?: http://www.flickr.com/photos/stradofear

  6. #6

    Join Date
    Jan 2013
    Location
    Madisonville, LA
    Posts
    2,412

    Re: Metering Question For Head And Shoulders Portrait

    Why don't you try it both ways and tell your results!

  7. #7

    Join Date
    Sep 1998
    Location
    Oregon now (formerly Austria)
    Posts
    3,397

    Re: Metering Question For Head And Shoulders Portrait

    Both techniques will get good results if you know what you are doing. For me, it would depend on what kind of meter I had

    If you have both, then do what's easiest. Incident metering needs a lot of walking back and forth if you need more than a couple of readings. That said, you may be able to compare lighting ratios a lot easier with the incident meter. It's more direct that way.

    Best,

    Doremus

  8. #8

    Join Date
    Jul 2016
    Posts
    4,566

    Re: Metering Question For Head And Shoulders Portrait

    Quote Originally Posted by IanBarber View Post
    If taking a Caucasian skin portrait photograph with natural light in a room where the light is more or less even, would you expose the face for Zone VI using a spot meter or would you just take an incident reading close to face

    It is a matter of personal preference. I prefer spot metering from the camera point of view, because it delivers a very exact reading of the fill vs key illumination ratio. In portraiture you have several illumination control factors, even with available natural light you can "modify" illumination, for example by placing subject closer to a window. One of the important factors is fill vs key illumination ratio, with spot metering you read the light amount that is directed to the camera, as illumination can be directional (like rim light) an accurate reading needs to be taken from the camera point of view.

    IMHO best photometer is a DSLR spot meter and preshots.

    Of course a Pro with a lot of experience/knowledge about his lightning gear may prefer incident reading, also subject feels more confortable than if you point him with something. Me, I feel more self-confident if I use an spot meter and I check well fill and key light.

    Anyway, incident metering is a good practice for being proficient with flashmeters.

  9. #9

    Join Date
    Jul 2006
    Location
    Oceanside, CA
    Posts
    220

    Re: Metering Question For Head And Shoulders Portrait

    Quote Originally Posted by IanBarber View Post
    If taking a Caucasian skin portrait photograph with natural light in a room where the light is more or less even, would you expose the face for Zone VI using a spot meter or would you just take an incident reading close to face
    Rate your film (B&W or color neg) at half box speed. Expose for the shadow side of the face. Develop for box speed.

    Scan the negs or print normally to multi-contrast paper.

    Yes, this is "over-exposing" the film. Prepare to be amazed at the contrast control, very long tonal (dynamic) range, grain control and over-all excellent image quality.

    Works beautifully with any kind of lighting or subject, but especially for back-lit, high-key subjects.

    Rich

  10. #10

    Join Date
    Oct 2013
    Location
    Doncaster UK
    Posts
    627

    Re: Metering Question For Head And Shoulders Portrait

    Some good tips there, thanks for the suggestions, evry one noted and I will certainly be trying most of them if not all

Similar Threads

  1. Head and shoulders portraits with TRF Graphics
    By Neal Chaves in forum Cameras & Camera Accessories
    Replies: 16
    Last Post: 25-Jun-2015, 17:37
  2. Portrait metering?
    By stradibarrius in forum On Photography
    Replies: 11
    Last Post: 30-Jul-2013, 04:16
  3. Head And Shoulders 4x5
    By John Conway in forum Style & Technique
    Replies: 54
    Last Post: 6-Oct-2011, 07:31
  4. Lens for 11x14 head & shoulders portraits?
    By cyrus in forum Lenses & Lens Accessories
    Replies: 18
    Last Post: 3-Oct-2011, 07:51
  5. Replies: 8
    Last Post: 23-Jul-2000, 11:41

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •