Results 1 to 2 of 2

Thread: ring hangers

  1. #1

    Join Date
    Jul 2000
    Posts
    471

    ring hangers

    When installing ring hangers on the back of a wooden frame. Is there a rule of thumb as to where to position the ring hanger?....such as 2" or 3' from the top of the frame? obviously they need to be low enough that the wire doesn't show. I was just wondering if the professional framers had a system as where to position the ring hangers. thanx in advance

  2. #2

    Join Date
    Jan 2004
    Posts
    57

    ring hangers

    Mount them so that the top of the "D" rings are 3" from the top of the frame, slightly angled in towards the center of the frame. If you can, don't wire them, but hang directly off the rings. This way you save a step in not having to wire them, they will never move on the wall and it's easier to maintain your center line.

Similar Threads

  1. 11x14 Film Hangers
    By Bruce E. Rathbun in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 3-May-2006, 18:52
  2. Processing Film in Diafine with 4-up Hangers
    By David Karp in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 1-Apr-2002, 13:01
  3. Hewes Film Hangers/Deep Tank Dev
    By Stephen Vaughan in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 18-Dec-2001, 13:53
  4. 11x14 tanks and hangers...
    By Jason M Wallce in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 9-Oct-2001, 15:26
  5. 5x7 Film Developing Hangers
    By Kevin Kemner in forum Darkroom: Film, Processing & Printing
    Replies: 3
    Last Post: 7-Jul-2000, 15:57

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •