http://www.ebay.com/itm/164Feet-4LED...MAAOSwT6pVk1aV
This is where I got my light has 4 leds 18.95, I have nothing to do with this guy, Mine seems to work OK . This kind of stuff is all over ebay. Good Luck
http://www.ebay.com/itm/164Feet-4LED...MAAOSwT6pVk1aV
This is where I got my light has 4 leds 18.95, I have nothing to do with this guy, Mine seems to work OK . This kind of stuff is all over ebay. Good Luck
It looks to me to be a simple commodity item produced in the PRC. Any IR source for security cameras should work, this technology has made my 59 yr. Old fingers a lot more sure when loading film, especially sheet film reels 2509n and CL81. I just love the technology, I sit down and take my time and everything comes out perfectly using the IR GOGGLES.
Developed nicely on the second batch, but the blackened metal light damper at the top of mine is rusting a bit after two uses as well. That's a bit worrisome...
David Aimone Photography
Critiques always welcome...
Dear David
For your question, I consulted the developing tank manufacturers.
1, B&W King development of all parts of the tank to take stainless steel processing. The sandwich pot cover, and the shell is also used as the material of stainless steel.
2, the tank cover is to take the "QPQ" process (Polish - Quench - Quench), change the appearance of stainless steel "black", in order to reduce the development of the tank into the light, to ensure the development of film.
I think: at present, after the use of the "traces" is not rust, it should be the agent in the QPQ coating left traces. This trace can be wiped gently, not firmly.
The structure of the developing pot cover is multilayer, and the rotating parts are multilayer, and the liquid medicine is easy to be retained.
Therefore, to avoid residual liquid and "QPQ" after the treatment of stainless steel produce "traces", I suggest that in each use of the development tank, should be soaked in water washing, and with a hot air dryer after the preservation.
I'm using this product, and I'm dealing with it.
This "trace" on the film is affected, I have not received the relevant information.
The above reply, I wonder if you can lift your concerns.
B&W King development tank this product is not large, design and production related to mechanical processing, materials, casting, chemical and other aspects of knowledge. These for me a person speaking, there are many difficulties, but also have a lot of do not understand.
I hope more photographer friends, there are experts in the field, the B&W King developing tank design, performance are discussed, and Suggestions are put forward
(I can't speak English, the above is a computer translation, I do not know whether it is accurate, please forgive me)
Thank you
bw-king: Excellent explanations. Your developing tank looks very nice. I will be purchasing one. Thank you for participating in the forum.
A tidbit: Stainless steel can rust if it is put in contact with regular steel at some point, and under some other conditions:
http://www.sperkoengineering.com/html/Rust.pdf
Extrapolating from this, it would seem, for instance, that cleaning your SS equipment with steel wool would the the worst of bad ideas.
Thanks, but I'd rather just watch:
Large format: http://flickr.com/michaeldarnton
Mostly 35mm: http://flickr.com/mdarnton
You want digital, color, etc?: http://www.flickr.com/photos/stradofear
David Aimone Photography
Critiques always welcome...
Steel wool will destroy the finest stainless steel. Absolutely the worst possible thing to do. SS should be cleaned with Bon-Ami this is the old Kodak standby, nothing but a little soap and natural feldspar. 99 percent of the time nothing more than warm water and drying with a soft towel is required. 300 series SS has high 18 % Chromium content this forms a protective CrO coating. Free iron from any kind of ordinary ferrous metal will disrupt this and cause corrosion. Never leave these beautiful tanks in contact with ordinary iron,it will cause pitting of the stainless. Also AVOID ALL CHLORINE LIKE COMET, 304 and 316 SS shouldn't rust if you avoid iron and chlorides. To passivate the surface Nikor would recommend in extreme cases using a nitric acid bath, today many people are using citric acid. This will rejuvenate the chrome oxide surface.
Thank lot of teachers to provide stainless steel materials and use of information.
B&W KING why choose stainless steel raw materials, because, I want to a photographer with a permanent use products.
A successful product, need a good design, good material, good processing.But more in need of a good method of use and use environment.
Although I used for a long time to develop this product, but with the requirement of a successful product, B&W KING still has a long way to go.
Hope the teacher, experts give more good advice.
I wish the teacher and friend, happy New Year!
Last edited by bw-king; 28-Dec-2015 at 23:47.
Bookmarks