Page 7 of 7 FirstFirst ... 567
Results 61 to 69 of 69

Thread: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

  1. #61

    Join Date
    Jun 2006
    Location
    NYC
    Posts
    373

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Going to ask him to make me another 8x10 holder as the one I had him make crops a little too much for my uses (my fault in measuring)
    Last edited by asf; 26-Aug-2017 at 08:15.

  2. #62

    Join Date
    Jun 2006
    Location
    NYC
    Posts
    373

    8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Deleted
    Last edited by asf; 17-Sep-2017 at 12:29.

  3. #63

    Join Date
    Jul 2016
    Posts
    2,361

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Quote Originally Posted by axs810 View Post
    I scan my "snapshot" 8x10 negatives on my Epson 4990 scanner by placing a piece of Tru-Vue Ultra Vue glass over the negative while it's laying directly on the platen glass. Works perfect for me I don't find anti-newton rings and the sharpness/quality is pretty good considering the scanner.


    BTW, do you have any more aluminum 8x10 negative frames? I'd buy one
    I guess that this is also a good way, probably the Low Res lens (used beyond 5.9 scan width, with area guide) is focused on the bed plane...

  4. #64

    Join Date
    Dec 2017
    Posts
    100

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Dear forum friends,

    Anybody has the perfect inner dimensions for 8x10 and 5x7 holders?
    As I have the Epson plastic version which is generally useless regarding the newton ring issue, I also like to try the pet mat version using the Epson for the outside dimensions.

    Thanks and best regards, Miguel

  5. #65

    Join Date
    Jul 2016
    Posts
    2,361

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Quote Originally Posted by Moogie View Post
    Dear forum friends,

    Anybody has the perfect inner dimensions for 8x10 and 5x7 holders?
    As I have the Epson plastic version which is generally useless regarding the newton ring issue, I also like to try the pet mat version using the Epson for the outside dimensions.

    Thanks and best regards, Miguel
    https://www.jbhphoto.com/blog/2011/01/29/film-diagonal/
    Click image for larger version. 

Name:	diag01.jpg 
Views:	23 
Size:	51.2 KB 
ID:	182926


    If you place the emulsion side facing to the glass then you'll mostly avoid the rings.

    You can also wet mount the sheet directly on the bed glass.

  6. #66

    Join Date
    Dec 2017
    Posts
    100

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Quote Originally Posted by Pere Casals View Post
    https://www.jbhphoto.com/blog/2011/01/29/film-diagonal/
    Click image for larger version. 

Name:	diag01.jpg 
Views:	23 
Size:	51.2 KB 
ID:	182926


    If you place the emulsion side facing to the glass then you'll mostly avoid the rings.

    You can also wet mount the sheet directly on the bed glass.
    Thanks a lot Pere, I will try your suggestions. Also for the wet mount scan I will search the forum to find some suggestions.

    Miguel

  7. #67

    Join Date
    Jul 2016
    Posts
    2,361

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Quote Originally Posted by Moogie View Post
    wet mount
    https://www.youtube.com/watch?v=Zg6uO2ODvbY

    Also get a cheap HEPA air purifier (I use a Honeywell 16000), with it you will get rid of dust by starting it 5 minutes before (if room is small).

  8. #68

    Join Date
    Dec 2017
    Posts
    100

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Quote Originally Posted by Pere Casals View Post
    https://www.youtube.com/watch?v=Zg6uO2ODvbY

    Also get a cheap HEPA air purifier (I use a Honeywell 16000), with it you will get rid of dust by starting it 5 minutes before (if room is small).
    Ah, that's a cool advice as well. I even have one at home but never used it for this purpose :-)
    And the video explains everything clearly.
    Thanks a lot, Pere!

  9. #69

    Join Date
    Dec 2010
    Posts
    16

    Re: 8x10 Scanning DIY for Epson scanners (v700/v750/v800/v850)

    Does anyone have experience scanning 8x10 film on a 10000XL? I have a 12000XL (same specs as the 10k I believe) and am trying to find a source for a custom holder that will keep the film flush with the bed. Ideally there would be ANR glass involved.

Similar Threads

  1. New Epson V800, V850 flatbed scanners
    By Oren Grad in forum Digital Hardware
    Replies: 99
    Last Post: 15-Feb-2016, 08:47
  2. Epson V800 & V850. thoughts?
    By yuexiachou29 in forum Digital Hardware
    Replies: 10
    Last Post: 28-Mar-2015, 11:47
  3. Replies: 44
    Last Post: 19-Mar-2015, 19:44
  4. Time to Buy - Epson V700 V750 or other for 8x10?
    By mccormickstudio in forum Digital Hardware
    Replies: 4
    Last Post: 3-Jun-2008, 09:31

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •